This has a bid on ebay
Sent from my iPhone using Tapatalk
Ya, and i sure hope its not you....lol
Just pick up a pair of 11" wide Marauder wheels. Need 295s or 305s but can't decide.
Sent from my iPhone using Tapatalk Pro
No, but I’m not SC’d. If I cold find a pair reasonably priced and I had funds (still waiting stimulus), I would send them out to get widened.
Sent from my iPhone using Tapatalk
Someone mentioned.. .... the wheel should be widened 1.5 inches so everything clears, some choose 2 inches and then rub the shock.
You'll need spacers for 11" wide Marauder wheel..11"? Wheel width is not edge to edge, it's bead seat to bead seat so 1/2 inch per edge less. Backspace is mounting surface to wheel edge.
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
That's rare to go that wide on stock offset. 10" usually needs a spacer
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
I already run 295/45 Nittos on stock rear wheels.
Sent from my iPhone using Tapatalk
11" with 1.5" spacers and MT drag radials + plenty of shock and fender clearance. Used by Motown, me and MuscleMerc.
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
Use this style spacer: https://www.summitracing.com/parts/tgi-140002-2-kit
No need for stud length worries or replacement.
The smaller included nuts attach the spacer to the axle and fit within the spacer. Then the MM lug nuts attach the wheel to the spacer lug studs.
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
There are currently 1 users browsing this thread. (0 members and 1 guests)