I miss whitey here
it gets oil soaked and the weld doesnt adhere right. I personally would take it to someone who will remove the bung thats jacked up, weld it shut after cleaning... and proceed to put the hole in another spot. Damn, Dennis Reinhart did this silver with a vortech and if he can do it, so can anyone else... Or can you just go one size larger on the portion going into the pan and use grey locktite oil pan gasket maker. So much faster.
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
Senior Member
I'm no welder, but this doesn't make sense. Welds don't "adhere" to anything, unless you're talking about JB Weld.Originally Posted by Turbov6Bryan
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote