Results 1 to 6 of 6

Thread: Crackling/popping exhaust

  1. #1
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353

    Crackling/popping exhaust

    Can we be done with this fad soon?

    It started off on high end exotics and wasn’t all that noticeable, a nice small crackle in between shifts that sounded pretty damn good! Now it seems every tuners first mod, especially cheap POS’s. And it’s beyond annoying having to follow their WAY over the top sounding like a broken ass backfiring junk box..

    Discuss.


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  2. #2
    Join Date
    Feb 2007
    Location
    Winston Salem, NC
    Posts
    775
    I remember when a burble was considered sexy...and "backfiring" was embarrassing! Ha! Boy, I'm getting "old man" mentality now! LOL I do not like it!!
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  3. #3
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,666
    Quote Originally Posted by justbob View Post
    Can we be done with this fad soon?

    It started off on high end exotics and wasn’t all that noticeable, a nice small crackle in between shifts that sounded pretty damn good! Now it seems every tuners first mod, especially cheap POS’s. And it’s beyond annoying having to follow their WAY over the top sounding like a broken ass backfiring junk box..

    Discuss.
    I think I've identified the problem here......
    I do my absolute best to leave* those Rice Crispy (Snap Crackle & Pop) Ricer Retards behind me.....
    sucking on MY exhaust fumes!

    *Its not too hard to road rape any of those piles of steaming, underpowered crap.

    And wouldn't ya' know .... I can NEVER find one of those little POS cars when I'm driving the 427 Cobra!!!


    All I want to do is to demonstrate to the Rice Tards what a real engine sounds like and what it sounds like through 4" sidepipes.....
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  4. #4
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by Joe Walsh View Post
    I think I've identified the problem here......
    I do my absolute best to leave* those Rice Crispy (Snap Crackle & Pop) Ricer Retards behind me.....
    sucking on MY exhaust fumes!

    *Its not too hard to road rape any of those piles of steaming, underpowered crap.

    And wouldn't ya' know .... I can NEVER find one of those little POS cars when I'm driving the 427 Cobra!!!


    All I want to do is to demonstrate to the Rice Tards what a real engine sounds like and what it sounds like through 4" sidepipes.....
    Truth! But this latest one that caused me to vent out loud today was being followed in my work van. It has a hard enough time spinning the tires in snow.. Eventually he got in the left turn lane and when I passed I also noticed he was missing a fender and front bumper. I guessing to show off his new intercooler he had mounted in case you couldn’t hear him from the front?

    I honestly do my very best to ignore their taunts when I’m in my car. It just seems silly to possibly get tickets over something that we both know who is gonna win that fight. Of course there is always exceptions after enough poking..


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  5. #5
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,666
    Quote Originally Posted by justbob View Post
    Truth! But this latest one that caused me to vent out loud today was being followed in my work van. It has a hard enough time spinning the tires in snow.. Eventually he got in the left turn lane and when I passed I also noticed he was missing a fender and front bumper. I guessing to show off his new intercooler he had mounted in case you couldn’t hear him from the front?

    I honestly do my very best to ignore their taunts when I’m in my car.
    It just seems silly to possibly get tickets over something that we both know who is gonna win that fight.
    Of course there is always exceptions after enough poking..
    I know what you mean....I rarely 'engage' with one of these idiots because it is not worth a HUGE ticket to prove what is already known.

    Also, these 'Tards are willing to run at WOT (85 mph is the maximum speed in their turds) for miles and miles.
    I'm only willing to run a quick 125 mph blast (allegedly) , then go back to normal cruising speed.
    Last edited by Joe Walsh; 04-22-2021 at 04:27 PM.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  6. #6
    Join Date
    Jun 2020
    Location
    Minnesota
    Age
    51
    Posts
    4
    Totally agree..Im in my sleeper grocery getter and those little punks sit next to me and rev the motor incessantly at the light....little do they know this ol lady can tree a light with the best of em..

    They never see it coming.....hahah.

    Sent from my SM-G935V using Tapatalk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Popping in rear end
    By Vostok in forum Shop Talk
    Replies: 32
    Last Post: 07-19-2014, 05:25 PM
  2. Exhaust Popping?!?!?!?
    By jwibbity in forum Exhaust
    Replies: 9
    Last Post: 12-30-2011, 11:46 AM
  3. popping sound during take off
    By Motorhead350 in forum Shop Talk
    Replies: 13
    Last Post: 08-16-2005, 05:34 PM
  4. rear popping again
    By the fat bastid in forum Shop Talk
    Replies: 10
    Last Post: 10-14-2003, 01:57 PM
  5. Right Rear End Popping ???
    By mungce in forum Community Discussion
    Replies: 15
    Last Post: 04-24-2003, 07:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •