Results 1 to 6 of 6

Thread: Blue smoke on start up

  1. #1
    Join Date
    Mar 2021
    Location
    houston texas
    Posts
    31

    Blue smoke on start up

    I've heard it's a problem that the valve seals would go bad on marauders but I'm getting conflicting results as how to deal with it. What I want is to fix it and to prevent it from happening again which I hear can be done but I'm not sure how. I heard something about 05 heads which is just a modification to the existing heads but I'm not sure what it consists of.

    Iirc the cause of this problem is that the coolant gets hot as it passes through the engine this not cooling the rear of the engine. If I'm wrong please correct me but would upgrading the cooling system help at all to prevent it from happening again after I fix it?
    2003 Mercury Marauder 300A ~117k miles
    1987 Ford Thunderbird Turbo Coupe ~100k miles

  2. #2
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,959
    The issue lies with valve stem seals, you'd have to replace those or at your mileage just do a freshen/rebuild on your heads.

    The "05" heads or more commonly known as the DC casting, had an improved cooling passage design at the rear of the head. This isn't a modification, its the cylinder head that was put on 2005 Aviators. You can just do the "rear cooling mod" to your current heads to prevent any cooling issues on cylinders 4 and 8 in the head.


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  3. #3
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,518
    Typically if you drive it more, the less it will billow smoke on start up. I notice if i let my car, or cars sit 6 months or longer there is more smoke.. typically if i drive it daily or drive it once a month then there is no smoke,... Some never smoke, some are random... zero issues. Just like any older car with valve stem seals, or heads been rebuilt and not done right. Factory, or repaired correctly, not much of a issue if you drive it 2 days in a row.
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  4. #4
    Join Date
    Oct 2014
    Location
    Cunningham, Kansas
    Age
    70
    Posts
    695
    I wouldn't be concerned unless it is consuming oil.
    2004 SB #2150 of 3214 Moonroof, Heated Seats and 6 CD Changer. Non OEM Mufflers and 32,XXX miles and counting.

  5. #5
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    It’s called character.


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  6. #6
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,666
    Quote Originally Posted by justbob View Post
    It’s called character.


    Sent from my iPhone using Tapatalk Pro
    LOL.....
    It also keeps the mosquito population in control.

    Sent from my Pixel 2 XL using Tapatalk
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Blue Smoke on Start Up
    By SVOMACH1 in forum Shop Talk
    Replies: 5
    Last Post: 08-01-2014, 03:47 PM
  2. Blue smoke on cold start
    By tbone in forum Shop Talk
    Replies: 34
    Last Post: 11-09-2010, 08:54 AM
  3. blue smoke at start-up
    By Bruce Wayne in forum Community Discussion
    Replies: 16
    Last Post: 04-25-2006, 08:50 PM
  4. Smoke on start up
    By Tom Kuznicki in forum Community Discussion
    Replies: 7
    Last Post: 03-17-2006, 04:29 PM
  5. Blue Exhaust Smoke On Cold Start
    By Dave G in forum Community Discussion
    Replies: 6
    Last Post: 08-11-2004, 06:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •