May need a replacement Marauder ECM (Computer) can anybody recommend a source?
Thanks in advance for your help.
May need a replacement Marauder ECM (Computer) can anybody recommend a source?
Thanks in advance for your help.
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
Hey, Maybe Marty ?
My next stop would be Mustang Eddie.
Interestingly, when I 1st talked to Marty, he needed to know the part number on my ECM... I'm pretty sure he said there were 4 different ones. Mine was a "CRD1".
I hope this is helpful
'03 Silver Birch. Stock rebuilt 4.L 32V DOHC, V7-JT blower w/ADTR racing supercharger kit, Shift kit in transmission, stainless works long pipes and cat backs, Ridetech coil-overs front, shocks in back (ADTR kit). Rebuilt calipers, upgraded front rotors, OEM Mercury wheels, [boost, oil P, WB fuel/air, and fuel pressure] gauges. Build duration was Dec 2019 to Mar 2022. 8 rib serp belt upgrade i/p.
I think I have one hanging around in the attic
"Come to me, Superman! I defy you! Come and kneel before Zod! Zod! "
found it. a MAV2 unit from 2004
https://imgur.com/xvzP38u
"Come to me, Superman! I defy you! Come and kneel before Zod! Zod! "
Thanks, my Model is 2003.
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
the 03 and 04 ecus are interchangeable only issue is that the 04 ecu has the 2nd knock sensor input hardware
can use the 03 ecu in an 04 but have to disable knock sensor 2
otherwise all the same
'03 Marauder 300A / Forged 11:1 Eaton @ 17 lbs - 87 Octane
decipha @ EFIDynoTuning
There are currently 1 users browsing this thread. (0 members and 1 guests)