Results 1 to 4 of 4

Thread: Seat question

  1. #1
    Join Date
    May 2022
    Location
    Woodstock
    Posts
    2
    Blog Entries
    1

    Seat question

    Hello-Iím new here and recently acquired a 2004 marauder. The interior is in nice shape overall with the exception of the drivers seat. I removed it and had an upholstery shop do some repairs. I reinstalled and now the recline is not working. I checked all three connections still no recline. I removed the seat and started investigating and noticed a dangling yellow plug in the rear of the seat ( I think itís for the airbag) not connected to anything. I removed the two screws on the plastic cover and found a yellow plug in there that will plug into it. My question is how do I get the wire through the seat to connect to the other? Otherwise I would have to run it outside of the seat. Any ideas on why no reclining? It all worked before I removed it. I would appreciate any advice. Thank you Roger

  2. #2
    Join Date
    Jul 2014
    Location
    NY
    Posts
    1,371
    I'm not an expert, but if everything is plugged in the way it should be, I would check with the fuses and go from there. Do all the other seat functions work? Does the seat move backward and forward?

  3. #3
    Join Date
    Oct 2004
    Location
    Cape Cod, MA
    Age
    65
    Posts
    2,539
    Check power into and exiting the switch. If that is good try power direct to the motor.
    2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
    2003 marauder black 28,000 miles all stock. Garage Queen.
    2004 marauder red daily driver.

  4. #4
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,278
    Be careful, many times yellow wires are airbags. Make sure there is no air bag in the upper seat bolster that you could set off accidentally.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Heated Seat Question
    By gdsqdcr in forum Interior Electrical/Electronics
    Replies: 9
    Last Post: 04-09-2017, 10:46 AM
  2. Seat assembly question
    By Black&Gifted in forum Shop Talk
    Replies: 2
    Last Post: 09-18-2011, 11:38 AM
  3. seat foam question
    By ImpalaSlayer in forum Community Discussion
    Replies: 7
    Last Post: 11-26-2009, 12:30 PM
  4. Car Seat Question....
    By Petrograde in forum The Lounge
    Replies: 27
    Last Post: 07-11-2004, 10:02 PM
  5. a question about the drivers seat....
    By MonsterD in forum Community Discussion
    Replies: 9
    Last Post: 07-04-2003, 06:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •