ON3 cross over delete Kit Install

[mercuryown123]

Hello All,

Is there anyone in the Chicagoland area that knows how to install these units? Any guidance is sincerely appreciated!

[Zack]

Do you have the fittings and hose yet?

[mercuryown123]

Hello,

I'm placing the order directly with ON3- it's i9n stock, so I expect it should take a couple of days to get

[Zack]

LOL Facepalm

[massacre]

What gives with this thread?
I have this kit on my car it is awesome.

[MOTOWN]

Yuppppp! Me too

[parker]

I just ordered mine, cheaper and way better looking than the MMR stuff I ordered and never installed.

[loud2004marquis]

It's a very nice kit indeed, another satisfied customer here.

[mercuryown123]

Hello Sir,

Please pardon my reaching out directly, although I noticed you mentioned you have the ON3 Crossover delete kit installed on your Mercury Marauder and I was wondering if you knew what kit I need to order by chance. The 1 temp sensor package or the 2 temp sensor package. My coolant bypass pipe is leaking and I'm told this kit will replace the system. My mechanic had some additional questions on the lower water outlet housing, if there is a radiator hose and if the sensors are located on the cylinder head. Any guidance on how to order / install this kit is greatly appreciated, thanks.

[MOTOWN]

Hello Sir,

Please pardon my reaching out directly, although I noticed you mentioned you have the ON3 Crossover delete kit installed on your Mercury Marauder and I was wondering if you knew what kit I need to order by chance. The 1 temp sensor package or the 2 temp sensor package. My coolant bypass pipe is leaking and I'm told this kit will replace the system. My mechanic had some additional questions on the lower water outlet housing, if there is a radiator hose and if the sensors are located on the cylinder head. Any guidance on how to order / install this kit is greatly appreciated, thanks.

You need the two sensor kit , you cut your upper radiator hose , and install the thermostat housing to the shortened hose , the sensors are located in the water fittings that attach to the water outlets on the heads.

[parker]

Yes the 2 sensor kit, even if you unhook the temp sensor for the gauge cluster. You can use it to run an aftermarket gauge to get a more accurate reading.

[mercuryown123]

What about the lower hoses?

[MOTOWN]

What about the lower hoses?

There eliminated , did you talk to on3performance about how this kit works /connects

[mercuryown123]

I've been in touch with an awesome mechanic / enthusiast that On3 referred me to, and he posed this question. He hasn't installed these kits on Marauders, just mustangs as I understand

[MOTOWN]

The kit is simple to install, the lower radiator hose goes to the coolant outlet on the drivers side of the block.