04 ABS Control Module

[CRUSIN']

I'm having difficulty with my brake pedal going almost to the floor and I believe the ABS Module is at fault. I have complete replacement of rear brake rotors, calipers and pads. The fronts are less than 1yr old and Master Cyl is new. Have bled the system multiple times so I feel the ABS module is where my problem lies.
Any advice will be appreciated. ABS module replacement is educating me to the fact there are no available replacements thru Ford or any of the parts houses. I'm sure I not the only person to experience this problem so fill me in on the cure.
Thanks

[Turbov6Bryan]

Since you put a master cylinder on the car, if any air got to the abs module. The car will need a scanner to manipulate the abs module to open and close, while you bleed the brakes.
This is a pretty common issue, but a easy fix. I am up at the chiefs stadium, and i have a buddy who owns a shop in Lenexa Kansas 66215. We are marauder brothers, his family has 4 marauders. There are many shops that do this job, but sometimes putting your car into the right hands will save heart ache and head ache. The shop is call Autopia , the shop is at noland and sante fe in lenexa. I work about 2 blocks away from him. If your car has any other issues, he can nail it down too.
Bryan.

[Turbov6Bryan]

Also, if you have a abs module code on the dash, that could just be the electric portion. 03 and 04 marauder specific abs modules are 2 different part numbers.
since your cars pedal goes down, i assume no warning lights on the dash, and your are just having a real soft pedal.