when I turn my wheel to near lock, especially backing up, my end links from sway bar catches-knocks on inside hub... Firmly. I can't take it anymore. What can I do?
when I turn my wheel to near lock, especially backing up, my end links from sway bar catches-knocks on inside hub... Firmly. I can't take it anymore. What can I do?
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
Center the swaybar and put a collar clamp on swaybar on the inside edge of each frame bushing. So 2 total.
Attachment 52757
Last edited by blazen71; 03-13-2023 at 01:12 PM.
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
It is centered and has these...![]()
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
Did you bend something? Hit a curb?
I honestly plan on taking my addcos off and replacing them with the ADTR bars made by Eibach, it's on my ever growing "list of things to do". The addco bars, specifically the front, have always fit like **** on a lowered car and the powder coat finish is a joke.
2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005
2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
2063/3214
(Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
5377/7838
2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB
1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors
When I had the Zack Big Brake Kit the sway bar would catch on the bracket, just like you're saying. I would grind the bracket til the swaybar clears, if that's your issue
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
The Addco guys are very interested in photos etc. I honestly think the bar is simply 1/2 to 1 inch too long. There is no reason for it to be that far into the wheel turning radius. I want to replace mine too... All three of them!
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
I have the same issue. BUT, I did replace the Addco with the ADTR last year and it did NOT resolve the problem; the end still knocks with slight movement during a firm turn. I've also tried the swaybar locks, but they didn't work. I'm sick of the noise, makes it seem like something is wrong when it isn't.
Best,
Rick
![]()
2004 Silver Birch w/Light Flint Interior
10.44 @ 131.66 MPH | 604 RWHP & 562 RWTQ
- Trilogy Supercharger #79 Twinscrew w/ 14PSI, Alternative Auto Forged 5.3 Stroker, Stage III Cams, JLT CAI, 405lph Return Fuel System, XL Heat Exchanger, 4.10's, Built Transmission, SCT 90MM MAF, Custom Tuned by Lidio.
- Kooks Headers. Magnaflow Cats & 18" Mufflers with 2.5" X-Pipe & Tailpipes. Megs' Res-Delete Tips
- Widened 9.5" Rear Rims w/Nitto NT555G2 Front Tires and NT555Rii Drag Radials.
245/45/ZR18 & 305/45/ZR18. TCE Performance Brakes and SS lines.
- Spoiler, MMX Driveshaft, Metco Loop and Control Arms, ADTR Front and Addco Rear Sway Bars, Art Carr Transmission Pan, Eaton Posi, Stud & Girdle kit, Moser 31 Spline Axles, Marauder Door Sills, SS Inserts, Dynamat, Pioneer AVIC-8201NEX with 6x8" 260w Speakers and 12" 1400w Sub-woofer
I will get photo into Addco. Somehow I ended up with a smenior guy 10+!years cell number and interest in this issue. With each of your individual permission, I can share your issues along with mine. He was very concerned that there were many of us with same issue. Mine touches both sides, so I cannot be a centering issue. I wish I had the dang stock ones back!
,
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
I took a look at my setup last night. I think the Addco sway bar is just plain too wide or the ends aren't bent in enough. My endlinks are soooo close to hitting the caliper mounting bolt heads.
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
EXACTLY MY THIUGHTS TOO. 1 inch or more too wide!
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
Strange... Mine has been on for years now and is not close to anything let alone hit and make noise. I wonder if they changed how it was made? Good luck, sounds like a horrible problem. I can't stand my cars making any undesirable/unwanted noises.
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
Didn't Addco have a solid bar and a larger diameter hollow bar?
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
I will ask the specs of each! I bought the lighter more expensive one. MYBLACKBEASTS... Which one do you have?
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
There are currently 1 users browsing this thread. (0 members and 1 guests)