Results 1 to 9 of 9

Thread: Blast from the past

  1. #1
    Join Date
    Feb 2005
    Location
    Parkton, MD
    Age
    57
    Posts
    1,552

    Blast from the past

    Howdy folks.

    Most of you won't know who I am, but for those who do, I hope all of you are awesome!

    I wanted to check in to see if anyone knew what the history of my car was after I sold it.

    Thanks.

    -Bob
    Just another clown on a bike...

    As good as any man, better than none.

    Former owner of a highly modified and very fast Marauder.


    "You CAN fit a square peg into a round hole, all you need is a big enough hammer." -Original

  2. #2
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    Scrap???????
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  3. #3
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,205
    Bob Still ridin'?

  4. #4
    Join Date
    Jan 2008
    Location
    Shell Beach
    Posts
    8,722
    Hey Bob! Good to hear from you. It's been awhile. Both our Marauders are semi retired but we still enjoy them. (There's a get together coming up next weekend so if you're in the area...) Hope you get some word about yours! All the best!
    2004 Silver Birch

    Silver Birch Society

    "I hear and I Forget
    I see and I Remember
    I do and I Understand"


  5. #5
    Join Date
    Feb 2005
    Location
    Parkton, MD
    Age
    57
    Posts
    1,552
    Hey there!

    Hope you and Mr. Man are stillrolling along with your usual swagger!

    Where is the meet up going to be?
    Just another clown on a bike...

    As good as any man, better than none.

    Former owner of a highly modified and very fast Marauder.


    "You CAN fit a square peg into a round hole, all you need is a big enough hammer." -Original

  6. #6
    Join Date
    Feb 2005
    Location
    Parkton, MD
    Age
    57
    Posts
    1,552
    Quote Originally Posted by Mr. Man View Post
    Bob Still ridin'?
    Yup. Still riding the '03 Road King. Had a couple of fast and fun cages since the Marauder, but nothing could replace the fun times I had with you guys.
    Just another clown on a bike...

    As good as any man, better than none.

    Former owner of a highly modified and very fast Marauder.


    "You CAN fit a square peg into a round hole, all you need is a big enough hammer." -Original

  7. #7
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,245
    Glad to see your still around here............
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  8. #8
    Join Date
    Jan 2008
    Location
    Shell Beach
    Posts
    8,722
    Quote Originally Posted by Cheeseheadbob View Post
    Hey there!

    Hope you and Mr. Man are stillrolling along with your usual swagger!

    Where is the meet up going to be?
    I t would be quite a ride for you but hey, we made it to White Marsh. ;-). Would be great to see you.. Here's a link to the thread.

    https://www.mercurymarauder.net/foru...ember-2023-JAM
    2004 Silver Birch

    Silver Birch Society

    "I hear and I Forget
    I see and I Remember
    I do and I Understand"


  9. #9
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,663
    Hey Bob!

    How have you been!?

    Do you still have the Ford Truck with the 300cid I6?
    I've been watching a guy on YouTube who has cut up and welded back together two 5.3L Aluminum LS heads to mount on a 300cid I6.
    Should be one killer 'Buzzin Half Dozen'.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Blast from the Past
    By Pat in forum Community Discussion
    Replies: 4
    Last Post: 12-13-2015, 07:48 AM
  2. Blast from the past
    By mcb26 in forum The Lounge
    Replies: 2
    Last Post: 11-02-2012, 04:45 PM
  3. Blast from the past
    By CWright in forum The Lounge
    Replies: 28
    Last Post: 09-23-2009, 08:11 PM
  4. Blast from the past?
    By Aren Jay in forum Community Discussion
    Replies: 17
    Last Post: 01-12-2009, 08:10 PM
  5. Blast from the past...
    By ts-pa in forum Pops Stereo
    Replies: 0
    Last Post: 10-30-2007, 05:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •