Results 1 to 4 of 4

Thread: Metco MPT0001 pulley installer/remover. Almost used once.

  1. #1
    Join Date
    Oct 2005
    Location
    Southwest Florida, Lee County
    Age
    55
    Posts
    3,457

    Metco MPT0001 pulley installer/remover. Almost used once.

    Been unsuccessfully chasing a way to remove the Billetflow 5 bolt hub for weeks now. I finally bought the Metco MPT0001 and it failed as well. After setting it up and with the assistance of Carfixer it took both of us all the strength we could muster and the only achievement was crushing the ribbed pulley with the pulling force of the tool. The hub will not move. The only choice is to buy a BF pulley and sell the one that came with the Metco blower drive kit.

    Anyway - the kit is almost used. It's been in my possession for one day and it can be yours for $120 shipped to the 48. You'll save $30.

    https://metcomotorsports.com/mpt0001
    '04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, lighted door handles. Currently installing Eaton M112.

    2004 Mercury Marauder
    Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
    2,187 of 3,214
    997 in Silver Birch
    448 with light flint interior
    304 with heated seats
    336 with sunroof

  2. #2
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    53
    Posts
    3,847
    step 1: remove the ribbed pulley.

  3. #3
    Join Date
    Oct 2005
    Location
    Southwest Florida, Lee County
    Age
    55
    Posts
    3,457
    Tried that first actually. The pulley hub, although completely even with the stub end of the shaft - is too close to the blower snout. It was impossible to get the little U shaped piece in there. The space needed is almost double what I have. That's why this fiasco has taken 5 weeks and gotten NO results. I figured I'd try with the ribbed pulley in place and it crushed the ribs together. We stopped before the inevitable happened.

    At this point it's easier to sell the tool at a loss and buy the proper pulley. At more loss. It pisses me off because so far I have bought everything for this project from Metco and shelved it.

    Now I have to buy it all again.

    Last edited by BAD MERC; 08-25-2024 at 11:37 AM.
    '04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, lighted door handles. Currently installing Eaton M112.

    2004 Mercury Marauder
    Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
    2,187 of 3,214
    997 in Silver Birch
    448 with light flint interior
    304 with heated seats
    336 with sunroof

  4. #4
    Join Date
    Oct 2005
    Location
    Southwest Florida, Lee County
    Age
    55
    Posts
    3,457
    ..........anyway. Tool is for sale.

    It was opened and there was ONE unsuccessful usage attempt.

    Not sure if it's returnable. After all the crap I've been through to this point it's not even worth the trouble.
    '04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, lighted door handles. Currently installing Eaton M112.

    2004 Mercury Marauder
    Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
    2,187 of 3,214
    997 in Silver Birch
    448 with light flint interior
    304 with heated seats
    336 with sunroof

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Eaton hub/pulley remover needed
    By BAD MERC in forum Power Adders
    Replies: 5
    Last Post: 08-22-2024, 12:24 PM
  2. For Sale Supercharger Pulley Puller/Installer Tool
    By krussell1203 in forum Marauder-specific Parts for Sale
    Replies: 0
    Last Post: 03-18-2017, 07:45 AM
  3. For Sale Eaton Pulley Puller and Installer
    By RacerX in forum Marauder-specific Parts for Sale
    Replies: 2
    Last Post: 08-25-2014, 08:06 AM
  4. For Sale OEM Pulley Puller/Installer Kit
    By ctrlraven in forum Misc for Sale
    Replies: 0
    Last Post: 06-30-2014, 02:05 PM
  5. Replies: 26
    Last Post: 05-09-2012, 05:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •