What kind of chassis dyno numbers does the Mercury Marauder make? I heard it was 260-265 rwhp.
Junior Member
What #'s does a MM make on a chassis dyno?
What kind of chassis dyno numbers does the Mercury Marauder make? I heard it was 260-265 rwhp.
1990 Mercury Grand Marquis GS
1990 Ford Ranger XLT 4x4
Fear The Bunny!
Neighbor!
Contributing Member
Stock, on a Dynojet most folks get about 242 (SAE corrected)
On a Mustang dyno, I have heard of higher numbers but not sure what they were.
Last edited by FordNut; 09-12-2004 at 05:09 AM.
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
Somewhere in the middle
Mine just made 426rwhp and 407rwt.
Stock should be just over 250 if I recall.
Silver 2004 Marauder
Trilogy #48 (SOLD April 2014)
1984 Mustang GT, stock, 60,000 original miles (SOLD August 2013)
2017 Ram Rebel 1500, Silver: 5.7 Hemi, Lots of extras...
Previous: 2014 Durango R/T
Senior Member
This is a stock M before and after a custom intake change.
Senior Member
On average: Stock MM. 241 H.P. / 255 RWTQ.
This figures have been documented on this forum for quite sometime...your results may vary.
Smokie
12.79 @ 107 mph.
60' 1.851 Street tires & Stock wheels.
TIMESLIPS
Performance Mods: Base Trilogy Kit, Exhaust, PHP Airbox.
Visit my Garage
Florida "The Supercharged State"
Senior Member
Welcome Al to a friendly and imformative site .Your questions will be better answered in this forum than any dealership .and thats a fact jack! ErrrrrAl
I just did mine yesterday. LINKY
SCMODS
I made 266 HP, 280 torque while 100% stock and 280 HP, 290 torque after tuning. I hear these are expectional results but I am happy with them
jta
2003 Marauder 300A
--76 of 7838208 of 7839
--Born on 5/27/02
--4:10 gears
--SCT9100 Tuner (Lidio's Tune)
--BFG KDW2 Tires (235/50 front; 255/55 rear)
--12C spark plugs
--Granatelli Connectors
--Pro-Guard
1976 Eldorado ConvertibleFor Sale
In line for a 2023 F-150 Lightning XLT
Contributing Member
Al - Welcome to the site.
2003 Marauder 300B,
6468 out of 7839 - Thanks Brian
Heated Seats
35% Tint
Mercury All Weather Mats
Trunk Organizer - Thanks MartyO
Sold 4/3/2009 Now resides in AL.
1961 Pontiac Bonneville Convertible
1973 Oldsmobile Toronado
2012 Kia Sedona Van
2008 Corvette Convertible
2003 Marauder 300 A Thanks Larry O 6/14/17
2021 Prius Prime Limited
2023 Chevrolet Silverado High Country
Member # 440
----- John
Shelby GT X2--Back In Black
What #'s does a MM make on a chassis dyno?
Everything it can...LOL!
Early reports and almost two years old now, boasted of 240 RWHP, 255 RWTQ. We used these early numbers to build on, but things are a bit more dicey today. Due to our "'04 bone stock numbers," I suspect that 250 RWHP and 260 RWHP are a bit more "normal" in our '04 expectations.
The '04 specs reflect upgrades we can feel in our seat of our pants, yes. Nonetheless, '04 specs are up, but not greatly. 11.25" torque converter over an 11.00". Dual knock sensors and expanded EEC with greater timing "elbow room," when there was none of that two years ago. Updated tranny gearing to the point where FMC renamed it a "4R75W," but this gear change is minork, and not worthy of the rebuild costs. Add all this up, and the '04 MM is hotter on the dyno, than the '03.
Please don't try any '03 at the stoplight, owners are much wiser now.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
