I didn't match the paint. Opted to VHT Nite-Shade the entire taillights.Ambitious1 ... What product did you use to match the actual Ford UA black paint color?
Since the Crown victoria taillights are not tinted ... 2 coats were applied and allowed to dry, the indented sections were then masked-off, and several coats were applied until the desired darkness was obtained on the remaining areas. The taillights were then wet-sanded and the clear-coat applied.
The effect is that the taillights are a RUBY RED with the indented sections lighter than the rest.
EDIT:*.attachment
.
Last edited by gdmjoe; 08-30-2019 at 03:12 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)