For those of you that have dropped the pan, have you replaced the
gasket or been able to reuse the old one?
Mike
For those of you that have dropped the pan, have you replaced the
gasket or been able to reuse the old one?
Mike
The Donk
'03 Black MM
'00 Black Contour SVT
Rule is always change gaskets...
the rubber style gaskets can be re-used
and in most instances you will not have
a problem...
The transmission pan gasket on the 4R70W is designed to be re-useable...it even says so right on the pan itself. It should be good for at least a half-dozen uses...
The Blackbird
Trilogy #61
Driveway Queen
The Spruce Goose
2004 Grand Marquis LS Limited Edition
Daily Driver
Thanks so much for the replies.
The Donk
'03 Black MM
'00 Black Contour SVT
I've reused mine four times now - the last time when I installed the B&M cast aluminum pan. No leaks, no runs, no errors!Originally Posted by RF Overlord
SOLD '03 300A Black - "805" of 7838
Plate - "EVILMERC"
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.
Gillom Rogers: [Books is giving Gillom a shooting lesson] Mr. Books, How is it you've killed so many men? My spread wasn't much bigger than yours.
John Bernard Books: First of all,friend, there's no one up there shooting back at you. Second, I found most men aren't willing, they bat an eye, or draw a breath before they shoot. I won't.
There are currently 1 users browsing this thread. (0 members and 1 guests)