This is insane!!! 650rwhp!!!
http://www.youtube.com/watch?v=QAWuHvVCI6g&search=ford
This is insane!!! 650rwhp!!!
http://www.youtube.com/watch?v=QAWuHvVCI6g&search=ford
I hope by KB you mean Kenne Bell, cause thats the only thing I can think of that has the initials KB on that car (the blower).
yes the power is nice but how that driver controled the CV was awesome.Originally Posted by 2003CTMarauder
2004 Silver Birch 300B
Build date:9/29/2003, Adopted on 12/02/05
Exhaust by Greg
13.630 @ 100.49 mph (11/21/10)
2015 Ford Focus SE Sport FWD
2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
2010 Ford Fusion Sport FWD
1989.5 Ford Mustang 5.0 LXsport
If I'm not mistaken that was a Ford sponsored One-Lap car.
Controlling a car in a power slide like is actually pretty easy if you have enough power to easily break the tires loose. The HP allows you to break them loose using a lot less centrifugal force.
Best,
Dan
Good video.
There was an article about that car in MM&FF's i believe. The car has an 03 cobra motor with a KB. Still waiting to see if someine will step up and try to throw a KB on a MM.
Joe
2004 SB
4.10's and a tune
More to come
Do you mean like this!
SOLD '03 300A Black - "805" of 7838
Plate - "EVILMERC"
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.
Gillom Rogers: [Books is giving Gillom a shooting lesson] Mr. Books, How is it you've killed so many men? My spread wasn't much bigger than yours.
John Bernard Books: First of all,friend, there's no one up there shooting back at you. Second, I found most men aren't willing, they bat an eye, or draw a breath before they shoot. I won't.
Now that is cool. How much work went into that????
Joe
2004 SB
4.10's and a tune
More to come
A lot!
From the owner/fabricator/installer/tuner - "Never Again!"
It is a VERY clean installation and the car WILL scare the stink out of you when it takes off!
SOLD '03 300A Black - "805" of 7838
Plate - "EVILMERC"
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.
Gillom Rogers: [Books is giving Gillom a shooting lesson] Mr. Books, How is it you've killed so many men? My spread wasn't much bigger than yours.
John Bernard Books: First of all,friend, there's no one up there shooting back at you. Second, I found most men aren't willing, they bat an eye, or draw a breath before they shoot. I won't.
That must be the 'Effster's ride...
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
Yes Sir!Originally Posted by Joe Walsh
Sorry I don't have any prize for the correct ID!
SOLD '03 300A Black - "805" of 7838
Plate - "EVILMERC"
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.
Gillom Rogers: [Books is giving Gillom a shooting lesson] Mr. Books, How is it you've killed so many men? My spread wasn't much bigger than yours.
John Bernard Books: First of all,friend, there's no one up there shooting back at you. Second, I found most men aren't willing, they bat an eye, or draw a breath before they shoot. I won't.
There are currently 1 users browsing this thread. (0 members and 1 guests)