Quick help please! Lower ball joint thread size
Hey:
Worked on replacing my front shocks and brakes over the weekend. When trying to remove the lower balljoint connection the allen head seat stripped out when the nut seized up. Couldn't move it either way, even though it was already 3/4 off. Ended up cutting the nut off with a dremel.
I didn't have a caliper available, but we used a 13/16" wrench for the hex to remove the nut. I can't find the matching thread size for that size hex nut. Does anyone know or could find out what thread size the lower ball joint on our cars has? It appears to be a fine thread (metric?).
I'll eventually will have to replace the whole ball joint, but for now I just need to get my hands on a replacement nut.
Thanks in advance for any help!
Peter aka MMM2003
300A Stock MM03 born on 6/25/2002 - sold June 2010!
(owner from 8/26/2002 - June 2010)
- Production# 2003 of 7838
- @17000miles 1/4 in 15.1s@93.3mph
- 180 TStat
- 235/50/18 on all four corners
- Dyno tune by SCT (Jerry W.) on 04-03-04
@ 260.7 hp/285.5 ft-lbs
- Front and rear EBC brakes with SS lines
- PHP upper & lower rear control arms
- Metco C/F intake tube
- Infinity speakers