FORD Ring Gear & Pinion Set 8.8" Rear Diff. 3.27:1

[Warpath]

.

http://cgi.ebay.com/ebaymotors/ws/eB...m=350052844322

NO RESERVE

Up on eBay is my take off 3.27:1 gears off of my 99 Cobra. They have about 1000 miles on them. They're in good condition. The box in the listing is actually from my 4.10 gears and not the "original" packaging. I've informed them of the discrepancy. The crush sleeve and bearing are used.

I don't have time to eBay my stuff. So, I dropped it off at a local place that sells stuff for you. All transactions are through this company. You won't be dealing with me directly. If you have questions, let me know.

[Warpath]

tttttttttt

[Stranger in the Black Sedan]

3.27s on a Marauder board? Mmmmkay

[Warpath]

If you don't want them, don't buy them. There's no need to make a smart ass comment about it.

I've sold plenty of stock parts to people interested in returning their cars back to stock (to sell them). You usually get more for the aftermarket parts off the car than on it. I also posted it here in case there was any one interested in them for another vehicle - perhaps a smaller vehicle with turbos. I know it's a long shot. But, whatever.

[arejayesss]

I've sold plenty of stock parts to people interested in returning their cars back to stock (to sell them).

Stock marauders come equipped with 3.55

[Warpath]

These parts are off of my 99 Cobra. They are the stock parts. That's what I meant. I didn't mean to imply they were stock mm parts.

[Tom Doan]

I put 3:27's on my car and I love them, and a whole bunch of you did to at MMV when you drove my car, but I got the torque to pull them too.