Senior Member
I think we should keep a level head on the colors in these sills...red would match exactly....NOTHING on the interior of our vehicles. Blue could be the same....but if it comes near the factory green of the guages...it might blend in a little better. Althugh I guess you could put color leds in whatever you wish.
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Ride w/the tints that be 35 Percents
I'm currently working with a guy one some prototypes!
'15 F250 CC 4WD 6.7L PSD
'11 CVLX
'05 E55 AMG
'91 350SD Turbodiesel
'97 Land Cruiser/78 Land Cruiser
...
sweet Wes! just no indian chief. just the word
2010 fusion se
HAD yellow valve covers!
Originally Posted by wchain
Excellent.
1. Black Sunshine (2003A F.I.T #3) (SOLD!)
2. 2004 SAP P71 (Gone)
3. The 2001 P71 (Flying Snow). (Sold)
4. The 1998 P71 Jinbei. (Sold)
5. 1990 5.7L IROC-Z (Sold)
Keeping a black car clean is not a hobby. It's a part-time job.
Support the troops.
Mount UP and Take em' DOWN!
At 1st I also said red, but green does make better sense to match our interior lighting.
"Damned if I do, damned if I don't!"
Member #8831
MERIDEATH aka "Purrrty Mean" was born on June 20, 2002.
Production #1685 of 7,838 and is #1685 of 7093 Black Beasts.
Delivered July 27th 2002, she revealed herself.
Unable to be tamed by her 1st owner, she was left to roam about & raid in search of plunder.
Through the pillage she became mine on January 23, 2008 and since then...
"She's tryin' to make a Devil out of me!"
-"TaKe 'Em D0wN!" TRILOGY TwinScrew #209 / TS0019-
Senior Member
Oh yes my friend Wes...let's do this!
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Senior Member
What ever you come up with, I'm sure will be just fine. I'm in. Jim.
sleeper
Public Enemy #1
The guage pack, font and color of the word "Marauder"
So wes keep us updated on those either red or green door sills
2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005
2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
2063/3214
(Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
5377/7838
2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB
1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors
Member
The guage pack, font and color of the word "Marauder"
So wes keep us updated on those either red or green door sills
I second this... red illumination and the font from the speedometer.
I'm in unless they're blue and/or too expensive.
SSDD
Seat belt releases, and everything else that's been added to the interior of my MM. Also the reflectors on the bottom of the doors.
Last edited by Blk Mamba; 08-31-2008 at 09:57 PM.
Trying to get it right...
I got the Dynopro sills with double sided tape and they fell off in a week. Then I tried silcone adhesive caulk and they fell off. Then JB Quik for some reason, and it stuck like crazy to the aluminium sills but not the plastic, so they fell off again. Getting the JB Quik off the bottom of one sill and I dinged up the letters and it took me a long time to clean up the mess I made.
Finally took a wire wheel on my drill and just ripped the hell out of the plastic where the sills mount. Then put the bottom of the sills on a heavy wire wheel and roughed them up. Then slathered the sills and the bottom of the add-ons with 2-ton epoxy. They ain't going anywhere now! They actually turned out well, and if you whack them with your foot when getting out of the car you don't have to worry about knocking them loose.
Still a real PITA though.
If Wes was able to do these I'd consider getting new OEM plastic sills to start with. My only concern is that I've got so much wired in now I don't know how much more I could add. Might be able to just tie in to the juice from the underbody lighting kit?
Norm
The real "Jive Turkey"
Gotta go with the Blue>>>>>
Public Enemy #1
Noo red, match the guages
2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005
2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
2063/3214
(Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
5377/7838
2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB
1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors
...
red would be the only way. if not red then green. but blue wouldnt match a damn hting
2010 fusion se
HAD yellow valve covers!
Green.
1. Black Sunshine (2003A F.I.T #3) (SOLD!)
2. 2004 SAP P71 (Gone)
3. The 2001 P71 (Flying Snow). (Sold)
4. The 1998 P71 Jinbei. (Sold)
5. 1990 5.7L IROC-Z (Sold)
Keeping a black car clean is not a hobby. It's a part-time job.
Support the troops.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
