Will a mustang upper and lowers fit on the marauder. if so what years? looking between steeda and upr products?
FLAT BROKE RACING FTMFW
Will a mustang upper and lowers fit on the marauder. if so what years? looking between steeda and upr products?
SEQ #3042 of 3213.
FLAT BROKE RACING FTMFW
has anyone tried this?
SEQ #3042 of 3213.
broke but not dead!
I believe they are different
2004 Trilogy #93P 12.2@113 Built and stalled
...
pretty sure they are different yes
2010 fusion se
Senior Member
different, the closest you can get are town car CA's I think Joe Walsh tried that but im not sure. Reinhart sells bad ass CA's , they make the car plant and handle much better.
Senior Member
Metco's
Dennis sells some other brand that I don't recall
Zack may have some of his and Mac's design.
Mustangs won't work.
04 Crown Victoria Sport
2008 Harley Davidson Nightrain- sold....
2016 Harley Davidson Street Glide - Olive Gold
1995 F150 4x2 4.9 5spd
1995 Schwinn High Plains 21 speed, custom gearing.
I need more COWBELL!
They are very different and will not fit.
'03 A #1801 - Tuned By Outlaw Dyno
445rwhp/408rwtq - 12.6/110mph
DR Vortech NOIC #5
Sold
'88 Mustang LX - Built 306ci, built AOD, built 8.8"
'11 F250 Powerstroke - 476hp/1208tq
BiRDMAN
Zack's ftw, don't have to grease the bushings every 6 months like the Metcos. But either one will do.
2004 Silver Birch 300B
Build date:9/29/2003, Adopted on 12/02/05
Exhaust by Greg
13.630 @ 100.49 mph (11/21/10)
2015 Ford Focus SE Sport FWD
2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
2010 Ford Fusion Sport FWD
1989.5 Ford Mustang 5.0 LXsport
STILL N/A
Not me, I've got a set of Metcos....couldn't resist the bling factor!Originally Posted by LVMarauder
Z&M control arms, if still available are a nice set up too.
Someone did use a set of Lincoln Limo control arms and they looked pretty good.
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
broke but not dead!
Someone did use a set of Lincoln Limo control arms and they looked pretty good.(quote)
I have the billet aluminum Limo uppers and the oem boxed lowers.
I checked them not so long ago, they are holding up nice.
2004 Trilogy #93P 12.2@113 Built and stalled
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
