anyone has tailshaft they could help me with? I'm changing my stock driveshaft from 05 GM to your marauder driveshaft i guess i need a extended tailshaft.. damm
anyone has tailshaft they could help me with? I'm changing my stock driveshaft from 05 GM to your marauder driveshaft i guess i need a extended tailshaft.. damm
I believe it is both the shaft and the housing, but not positive. If so, the tranny will probably have to come apart to swap it so you might as well do a rebuild/upgrade on it at the same time.
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
In case noone replies with used offerings .....
F5UZ-7A039-A - transmission extended tail housing. *You will need to swap the VSS plug from yours.
$113 wholesale / $155 retail
F7AZ-7086-A - tail housing gasket *Just in case.
$3 / wholesale / $4 retail
If you decide not to swap the VSS plug and buy new ...
F2UZ-7H183-A - vehicle speed sensor plug
$7 wholesale / $10 retail
BTW ... Doing just the extended housing will be fine.
SOLD '03 300A Black - "805" of 7838
Plate - "EVILMERC"
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.
Gillom Rogers: [Books is giving Gillom a shooting lesson] Mr. Books, How is it you've killed so many men? My spread wasn't much bigger than yours.
John Bernard Books: First of all,friend, there's no one up there shooting back at you. Second, I found most men aren't willing, they bat an eye, or draw a breath before they shoot. I won't.
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
i' ve got both , tailshaft and drive shaft, let me know if you still need them
There are currently 1 users browsing this thread. (0 members and 1 guests)