Page 1 of 7 1234567 LastLast
Results 1 to 15 of 94

Thread: Ported Short Runner Intake Results!

  1. #1
    Join Date
    Mar 2009
    Location
    San Antonio, TX
    Age
    55
    Posts
    60

    Ported Short Runner Intake Results!

    Ok Guys/Gals,

    Today we did spent some quality time at the dyno with a Marauder! Yes!

    We did some back to back testing of one of our custom Ported Short Runner intake on STOCK long block Marauder!

    Here is the combination BEFORE DYNO:

    Custom Cold Air Intake
    Ported Intake (not ported by Nazty Performance)
    Welded Glass Packs
    No Tune

    Her is the combination AFTER DYNO:

    Everything the same, replaced ported intake with Nazty Performance Ported Short Runner Intake

    RHWP:







    RWTQ:




    Unfortunately, we did not have a stock intake to compare with! We estimate that the gains would have been 30+RWHP when compared to the stock intake.

    As you guys can see, these are huge gains ALL ACROSS the power band with no losses anywhere! Further more, effectively extending the RPM range WELL within the stock parameters!

    Another thing to notice is that we did not touch the tune. With tuning, we anticipate another 10RWHP gains!!!

    Huge Kudos to "BAD FIVE O" who voluntered his MM for the dyno testing!

    Have some more pics and videos to load later this evening!

    Naz

    PS. This WILL BE the 1st MM in the 12s all motor.

    www.NaztyPerformance.com
    PHONE: 210.818.5087
    EMAIL: Naz@Naztyperformance.com

    "Your Source for Ported Intakes, Ported Short Runners, Ported Heads, HCI Combos and Custom Billet Cams!

    ~99 Cobra~
    537RWHP, 4.6L Based, All Motor!
    128.62MPH Trap @ 3600LBS All Motor!
    9.88 @ 143+MPH Little Juice!!

  2. #2
    Join Date
    Aug 2006
    Location
    MA
    Age
    36
    Posts
    5,893
    Very cool. Some good results.
    '03 A #1801 - Tuned By Outlaw Dyno
    445rwhp/408rwtq - 12.6/110mph
    DR Vortech NOIC #5
    Sold
    '88 Mustang LX - Built 306ci, built AOD, built 8.8"
    '11 F250 Powerstroke - 476hp/1208tq

  3. #3

    Thanks Nazty

    Thanks Nazty Performance it runs like a bat out of HELL!!!!!!!!!!!!!
    Here is my baby's dyno run http://videos.streetfire.net/video/N...der_679775.htm
    Last edited by BAD FIVE O; 05-01-2009 at 04:56 PM.

  4. #4
    Join Date
    Sep 2007
    Location
    townsend DE
    Age
    34
    Posts
    12,474
    naz has mine been shipped yet?
    2010 fusion se


  5. #5
    Join Date
    Mar 2009
    Location
    San Antonio, TX
    Age
    55
    Posts
    60
    Quote Originally Posted by ImpalaSlayer View Post
    naz has mine been shipped yet?
    Yes! It went out!!!!



    Naz

    www.NaztyPerformance.com
    PHONE: 210.818.5087
    EMAIL: Naz@Naztyperformance.com

    "Your Source for Ported Intakes, Ported Short Runners, Ported Heads, HCI Combos and Custom Billet Cams!

    ~99 Cobra~
    537RWHP, 4.6L Based, All Motor!
    128.62MPH Trap @ 3600LBS All Motor!
    9.88 @ 143+MPH Little Juice!!

  6. #6
    Join Date
    Sep 2007
    Location
    townsend DE
    Age
    34
    Posts
    12,474
    SWEET!!!!!!!! disreguard last pm then. thanks man!
    2010 fusion se


  7. #7
    Join Date
    Aug 2008
    Location
    Marauderville MD
    Age
    36
    Posts
    1,604
    Yeah a 01' Cobra put down 383RWHP/365RWTQ, Stock Short Block with the HCI stage 2 option.
    2004 DTR Mercury Marauder
    Build date:8/18/03
    Delivery date:8/14/08
    #21 of #983 DTR's
    #51 of #3213 in 04'

    And im not spanish my friends just say i look it the names "Michael"
    Quote Originally Posted by DTRMiguel View Post
    Fat people dont get kidnapped
    Zack Tune
    JLT DTR Cold Air Intake
    1/4 Mile ET 14.202
    1/4 Mile MPH 99.13



  8. #8
    Join Date
    Feb 2008
    Location
    Boston
    Age
    40
    Posts
    3,433
    Quote Originally Posted by ImpalaSlayer View Post
    SWEET!!!!!!!! disreguard last pm then. thanks man!
    I HATE you!!!!!
    2003 300A
    #4916 of 7839
    N/A Bolt on's
    4:10 Gear's
    Steeda Underdrive Pulleys
    Stewart EMP Waterpump
    K&N CAI
    Sparta Control Arms
    Zack Tune
    TCE SS brakelines
    [LEFT]SS Insert's[/LEFT

  9. #9
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,663
    I like the results, but as they say: "Nothing is for free"....

    How do the numbers compare from 2500 rpm up to 4400 rpm?
    A street driven car spends most of it's time below 3,000 rpm.
    I wouldn't want to lose a lot of low end torque to get the high end HP, at least not in a 4300 LB automatic trans Marauder.
    Last edited by Joe Walsh; 05-01-2009 at 08:32 AM.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  10. #10
    Nice work Nazty! Stock baseline dyno for most MM's are 235-240rwhp 245-250tq on the average.

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  11. #11
    Join Date
    Apr 2005
    Location
    Queens NY
    Age
    47
    Posts
    12,182
    Quote Originally Posted by ctrlraven View Post
    Nice work Nazty! Stock baseline dyno for most MM's are 235-240rwhp 245-250tq on the average.
    So when you taking the plunge?? Im actually debating on doing this but I havent had the greastest luck lately working on my own car.

    2003
    MERCURY MARAUDER 300A

    Build Date
    5/31/02
    Sequence#
    #363 of 7839 Black Marauders
    Dyno tested power
    450 RWHP & 405 RWTQ on 93 octane
    Best 1/4 mile time to date
    12.456@109mph
    Visit my Garage
    Blackened300a's Garage



  12. #12
    Join Date
    Sep 2007
    Location
    townsend DE
    Age
    34
    Posts
    12,474
    im very anxious to recive mine
    2010 fusion se


  13. #13
    Join Date
    Apr 2005
    Location
    Queens NY
    Age
    47
    Posts
    12,182
    Quote Originally Posted by ImpalaSlayer View Post
    im very anxious to recive mine
    Are you going to do a write up of the install?

    2003
    MERCURY MARAUDER 300A

    Build Date
    5/31/02
    Sequence#
    #363 of 7839 Black Marauders
    Dyno tested power
    450 RWHP & 405 RWTQ on 93 octane
    Best 1/4 mile time to date
    12.456@109mph
    Visit my Garage
    Blackened300a's Garage



  14. #14
    Quote Originally Posted by Blackened300a View Post
    So when you taking the plunge?? Im actually debating on doing this but I havent had the greastest luck lately working on my own car.
    Divorces are costly man lol plus I still have 4.10 gears to do hit the track to see where I'm at before taking the plunge on the intake manifolds and of course LT header & full exhaust, pulleys, etc etc.

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  15. #15
    Join Date
    Sep 2007
    Location
    townsend DE
    Age
    34
    Posts
    12,474
    install is very simple i dont see it being nessesary????
    2010 fusion se


Page 1 of 7 1234567 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Ported intake, and stock upper & lower intakes for sale.
    By Embassy in forum Marauder-specific Parts for Sale
    Replies: 11
    Last Post: 10-27-2009, 08:58 AM
  2. 4v Engine Head info.... Detailed...
    By Loco1234 in forum Shop Talk
    Replies: 12
    Last Post: 01-20-2009, 05:24 PM
  3. PHP Ported Intake Manifold?
    By BruteForce in forum Exhaust
    Replies: 32
    Last Post: 03-02-2007, 09:05 AM
  4. Ported Marauder intake for sale
    By DEFYANT in forum Community Discussion
    Replies: 5
    Last Post: 02-19-2005, 09:29 AM
  5. Upper/Lower Intake Mods
    By SergntMac in forum Shop Talk
    Replies: 19
    Last Post: 10-05-2004, 06:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •