Page 1 of 3 123 LastLast
Results 1 to 15 of 36

Thread: Parting out black Twin turbo 2004 cobra 3500 miles one bad AZZ car

  1. #1

    Parting out black Twin turbo 2004 cobra 3500 miles one bad AZZ car

    This is a 2004 black cobra with 3500 miles, yes that is right 3500 miles never wrecked or damaged.
    The car was being built as a Silver State car, but the car never was finished. The guy has had it at a local shop for 2.5 years, but has done little with it for the past 9months. Due to the economic times, my very good friend, who owns it, wants nothing to do with the car any longer and asked me to just part it out. I have title in hand for this car. I will not sell it complete. It will be broke up in parts and sold off. I have itemized everything. Everything in this car is NEW and never ran. I have the CLEAR title in hand.

    I want to keep a rolling chassis, so no individual body part will be sold. I do have options for the rear suspension and can offer a stock IRS, a built MACH1 solid rear and a stock 96-98 rear. Front suspension will be returned to stock configuration with options of your choice.
    $11,000 as a chassis.




    yes.....that's a REAL CobraR in the background!


    HRE Wheels w/tires

    T.ires are KDWs Rear tires are 295X35X18 and the fronts are 265X35X18
    $4500.00





    New G-Force T-56
    It has never been ran.
    $5200.00

    The clutch is a twin disk 26 spline clutch and flywheel assy.. It is a one off set up, built by a Nascar shop in Vegas $850.00

    DFI stand alone new in the box with latest Version.
    $2000

    5.1 Billet Stroker Engine
    Oliver rods , custom CP pistons, custom crank, ARP2000 studs, Comedic head gaskets, Ported heads , 1mm over sized valves, custom Comp billet cams, Canton oil pan, billet oil pump, all new. This motor is ready to go. Custom black valve covers and black timing cover.
    This is a totally one off built engine!
    $13,500 for engine. Complete and ready to run!

    Stop Tech brakes 355mm

    Complete kit, lines, rotors and calipers The rotors are 2 piece. The calipers are black in color
    $1800.00

    Twin Turbo kit

    This is a full custom twin turbo with 67mm Turbonetics ball bearing turbos. Tial waist gates, Maridyne cooling fans, PSR K member, MM coil overs, complete 3 in. stainless exhaust all the way to the rear axle, Sullivan intake, Sullivan fuel rails with Custom sheet metal intake, all new
    $11000.00


    WILD BILL
    PRO-AMERICAN

    TorchRed 2003 MACH1 (Louise)
    "I remember my fallen brothers so that they may live on."


  2. #2





    Fluidyne radiator
    $250.00

    Maximum Motorsports 6 point roll bar

    with diagonal bar, strap mounts and removable door bars, powder coated black
    $400.00




    9 inch Currie rear end
    all 31 spline Detroit True Trac, Strange aluminum 3rd member with the aluminum bearing support, Torino big ends, with all brake brackets to fit mustang rear brakes
    $2500.00

    Maximum Motorsports Anti roll bar

    Note this is a weld on unit and it is currently welded on to the 9 inch but we can remove it.
    $300.00 by its self or $250.00 with the rear end.
    Maximum Motorsport pan hard bar
    $250

    Maximum Motorsports rear control arms with out spring perch.
    $220.00





    Meziere electric water pump wiring harness not included.
    $200.00 SOLD!
    WILD BILL
    PRO-AMERICAN

    TorchRed 2003 MACH1 (Louise)
    "I remember my fallen brothers so that they may live on."


  3. #3
    Join Date
    Aug 2005
    Location
    JUPITER
    Age
    65
    Posts
    1,723
    What are the piston dishes and compression on the motor? Iron block?
    2003 300A Black MM
    3.73's, 3500 PI, T64e at 9.5 PSI
    Belts are for washing machines.
    Theme song (s) : Back in Black & Thunderstruck!!

    Ride it like a Ford.!!

    What would you do if you weren't afraid?

    I'm not a gynecologist....but I'll take a look at it.

  4. #4
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    wow... what a nice car, to bad its getting chopped up


    Is this posted on SVTP? You'd have more luck over there


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  5. #5
    Quote Originally Posted by juno View Post
    What are the piston dishes and compression on the motor? Iron block?
    It's a 9.2 compression engine with a 98 Teksid block
    WILD BILL
    PRO-AMERICAN

    TorchRed 2003 MACH1 (Louise)
    "I remember my fallen brothers so that they may live on."


  6. #6
    Quote Originally Posted by offroadkarter View Post
    wow... what a nice car, to bad its getting chopped up


    Is this posted on SVTP? You'd have more luck over there
    Yeah.........it's sad.

    It may get posted on SVT, but there are way too many know it alls for me to tolerate.
    I've got it posted in quite a few places on the internet.
    WILD BILL
    PRO-AMERICAN

    TorchRed 2003 MACH1 (Louise)
    "I remember my fallen brothers so that they may live on."


  7. #7
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,665
    Really nice hardware but,
    That's some salty prices on the engine, transmission and twin turbo kit...
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  8. #8
    Join Date
    Aug 2005
    Location
    JUPITER
    Age
    65
    Posts
    1,723
    Quote Originally Posted by Mach1Marauder View Post
    It's a 9.2 compression engine with a 98 Teksid block
    That is an incredible motor!!!
    My dream but too much for my wallet,

    That was one bad Cobra!!!!!
    2003 300A Black MM
    3.73's, 3500 PI, T64e at 9.5 PSI
    Belts are for washing machines.
    Theme song (s) : Back in Black & Thunderstruck!!

    Ride it like a Ford.!!

    What would you do if you weren't afraid?

    I'm not a gynecologist....but I'll take a look at it.

  9. #9
    Quote Originally Posted by Joe Walsh View Post
    Really nice hardware but,
    That's some salty prices on the engine, transmission and twin turbo kit...
    Not if you just sit down and add everything up and then realize that NONE of the parts have been run and all are brand new.

    You can't come close to duplicating any of the components for the price.
    WILD BILL
    PRO-AMERICAN

    TorchRed 2003 MACH1 (Louise)
    "I remember my fallen brothers so that they may live on."


  10. #10
    Join Date
    Dec 2005
    Location
    Layton, UT
    Age
    43
    Posts
    4,328
    And if all these items were installed on the car, you'd get...about 28-30k.

    You do realize for the price of the "chassis" and wheels alone you can BUY a fully driveable, nice most likely 11 second termy?

    Matt H.
    (sold)2004' SB, 268rwhp/295tq
    1990 Mustang GT, Dart 363, Si-trim, T56, Holley Terminator X. 622rwhp/527tq
    2003 SVT Cobra, Posi Port 497rwhp/481tq. SCT Pro Racer Pack.
    2017 F-150, 5.0
    2013 SHO DIB Performance Pack

  11. #11
    Join Date
    Jun 2003
    Location
    McDonough, GA
    Posts
    2,394

    Exclamation Why??

    You told us the story, but WHY again is it being parted out? It looks ready to drive out the door. Why would anyone what to part out a SUPER built Cobra - because he's p***ed at a shop? I am missing something important here - someone help me?

    Glenn Ford
    Trilogy #124 SOLD - 8/2014
    11.80 @ 117.16 MPH: SSHS9
    1.74 sec - 60'
    443 RWHP/437 RWTQ
    "Stock Internal Engine" - Click Below

  12. #12
    Join Date
    Dec 2005
    Location
    Layton, UT
    Age
    43
    Posts
    4,328
    Sounds kinda FISHY TO ME! lol

    Matt H.
    (sold)2004' SB, 268rwhp/295tq
    1990 Mustang GT, Dart 363, Si-trim, T56, Holley Terminator X. 622rwhp/527tq
    2003 SVT Cobra, Posi Port 497rwhp/481tq. SCT Pro Racer Pack.
    2017 F-150, 5.0
    2013 SHO DIB Performance Pack

  13. #13
    Join Date
    Feb 2008
    Location
    Boston
    Age
    40
    Posts
    3,433
    Quote Originally Posted by Vortech347 View Post
    Sounds kinda FISHY TO ME! lol

    I agree 100%!! But I didn't wanna say it
    2003 300A
    #4916 of 7839
    N/A Bolt on's
    4:10 Gear's
    Steeda Underdrive Pulleys
    Stewart EMP Waterpump
    K&N CAI
    Sparta Control Arms
    Zack Tune
    TCE SS brakelines
    [LEFT]SS Insert's[/LEFT

  14. #14
    Join Date
    Dec 2002
    Location
    Cape Cod
    Posts
    13,887
    Look, Guys! Mach1Marauder is doing a friend a favor. It's his friend's decision on what to do with the car and parts. This is the "For Sale" forum and not a platform to second-guess the motives of the seller. If you're interested, post up and contact Mach1Marauder. If you're not interested, well.......
    MOK


    |Administrator, MM.Net | International Director of Membership|


    --------------------------


    I don't brake for curves!


    The eyes may be the doorway to the soul,

    but the voice is the chariot to the heavens









  15. #15
    Quote Originally Posted by Glenn View Post
    You told us the story, but WHY again is it being parted out? It looks ready to drive out the door. Why would anyone what to part out a SUPER built Cobra - because he's p***ed at a shop? I am missing something important here - someone help me?

    Glenn Ford
    No one is mad or upset at anyone. If you read the first section, you'll see "Due to the economic times". This means he's fell on a bit of a rough time and has to regroup and re-prioritize his life and a really nasty Mustang doesn't figure into that life. I didn't think it mattered or I'd have to spell it out.

    Quote Originally Posted by MM03MOK View Post
    Look, Guys! Mach1Marauder is doing a friend a favor. It's his friend's decision on what to do with the car and parts. This is the "For Sale" forum and not a platform to second-guess the motives of the seller. If you're interested, post up and contact Mach1Marauder. If you're not interested, well.......
    Thank you!
    I guess some people have nothing better to do.
    WILD BILL
    PRO-AMERICAN

    TorchRed 2003 MACH1 (Louise)
    "I remember my fallen brothers so that they may live on."


Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2004 Marauder, Black w/42,400 miles
    By W4LTD in forum Marauders for Sale
    Replies: 14
    Last Post: 05-30-2009, 08:54 AM
  2. Twin Engine, Twin Blown and Quad Turbo Diesel Truck
    By ctrlraven in forum The Lounge
    Replies: 4
    Last Post: 08-12-2008, 10:41 AM
  3. 2004 Trilogized Marauder-Black-31k miles
    By Zack in forum Marauders for Sale
    Replies: 151
    Last Post: 06-02-2008, 07:18 AM
  4. Black 2004 MM in Socal **Low Miles**
    By dalucifer in forum Marauders for Sale
    Replies: 16
    Last Post: 04-20-2008, 03:22 PM
  5. Twin Turbo Cobra For Sale
    By KillJoy in forum The Lounge
    Replies: 5
    Last Post: 05-10-2007, 10:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •