Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: what is the best exhaust for marauder

  1. #1
    Join Date
    May 2009
    Location
    saudi arabia
    Age
    33
    Posts
    43

    what is the best exhaust for marauder

    i want to change my exhaust and i found this what do you think is it good or there is a better one

    http://www.reinhartperformance.com/M...ategory_Code=9

    and what do you think, does it worth to change my camshaft or not

  2. #2
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,207
    Changing the cams won't do much unless you are going to do major engine work. Ford did a pretty good job with the OEM cams.

    Reinhart was a vendor here so he sells good stuff. As for me I'm saving for the Stainlessworks set up, front to back
    Last edited by Mr. Man; 09-24-2009 at 12:10 PM.

  3. #3
    Quote Originally Posted by Mr. Man View Post
    Changing the cams won't do much unless you are going to do major engine work. Ford did a pretty good job with the OEM cams.

    Reinhart is a vendor here so he sells good stuff. As for me I'm saving for the Stainlessworks set up, front to back
    Reinhart is no longer a vendor here, he gave that up a while ago.

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  4. #4
    Join Date
    Sep 2007
    Location
    Smoke Cloud
    Posts
    16,157
    Thats the system im running on mine.

    The KING of BLING!


    BOOST GETS YOU IMPERSONATED!

    Quote Originally Posted by GOT5.0 View Post
    Be forewarned dont run the one that says DOOM. cause thats just what youll get!
    Quote Originally Posted by TAKEDOWN View Post
    It's easy to find D00M, just follow his smoke or his trail of trophies!
    Quote Originally Posted by MMBLUE View Post
    When your good nobody likes ya, everyones jealous.

  5. #5
    Join Date
    Jun 2008
    Location
    Medford, NJ.
    Age
    77
    Posts
    1,116

    Thumbs up

    Reinhart may not be a vendor any more but his products are good & he will help you, he has alot of knowledge & good advice. Call him.

  6. #6
    Join Date
    Dec 2002
    Location
    Warrenton,MO
    Age
    53
    Posts
    2,674
    Quote Originally Posted by jflave View Post
    Reinhart may not be a vendor any more but his products are good & he will help you, he has alot of knowledge & good advice. Call him.
    Thats Right not a vendor? but a good guy and always willing to help! if I ever need parts I will try him 1st!
    ________________
    Marauderless

    04 SB-- Alluminator/2.3 Whipple 20lbs boost, 545RWHP/556RWTQ sold!!

    2012 Mustang GT Kona Blue-My New Baby!

    03 300A- Vortech S-trim A2A 500 RWHP -Sold

    03 Marauder KB-S #7- R.I.P.Bought new 06-02
    sent to KB 1-03 #7 but it was the 3rd one they did

  7. #7
    Join Date
    Jun 2005
    Location
    East Lansing, MI
    Age
    40
    Posts
    3,528
    Buy headers yourself, and have the rest built by a shop for pennies on the dollar... but that's just me


    11.90 @ 117.5mph on 93 octane
    324 shortblock, Novi 2000, Now with optional axle removing tires
    Igziabeher

  8. #8
    Join Date
    Dec 2006
    Location
    Southern Maryland
    Age
    40
    Posts
    3,507
    most shops are going to construct pinch bent, non stainless nasty-ness
    Steve H., Charles County, MD www.carfap.com
    1994 Lincoln Town Car. 98-02 front brakes, P71 steering and sway bars, Eaton swap build underway using TorkTech 4.6 2v intake kit.
    2011 Infiniti M37x
    2004 F250, v10 6 speed manual. ex-US Forest Service truck
    2000 BMW M5
    1976 Jeep DJ5 (postal)

  9. #9
    Join Date
    Jun 2005
    Location
    East Lansing, MI
    Age
    40
    Posts
    3,528
    Quote Originally Posted by Stranger in the Black Sedan View Post
    most shops are going to construct pinch bent, non stainless nasty-ness
    that's a pretty wild assumption I dunno how you figure that, go to a shop with a mandrel bender, and take them the stainless pipe, and make sure they will weld stainless...


    11.90 @ 117.5mph on 93 octane
    324 shortblock, Novi 2000, Now with optional axle removing tires
    Igziabeher

  10. #10
    Join Date
    Nov 2008
    Location
    North of the Border
    Age
    46
    Posts
    3,195
    Quote Originally Posted by Stranger in the Black Sedan View Post
    most shops are going to construct pinch bent, non stainless nasty-ness
    +1
    Don't bring skittles to a gunfight.

  11. #11
    Join Date
    Jul 2008
    Location
    North Georgia
    Posts
    3,990
    Quote Originally Posted by abmerbati View Post
    i want to change my exhaust and i found this what do you think is it good or there is a better one

    http://www.reinhartperformance.com/M...ategory_Code=9

    and what do you think, does it worth to change my camshaft or not
    He has my car now putting these on. The only difference is I am running magnaflow mufflers.

  12. #12
    Join Date
    Dec 2006
    Location
    Southern Maryland
    Age
    40
    Posts
    3,507
    Show me a shop with a mandrel bender. They are very few and far between.
    Steve H., Charles County, MD www.carfap.com
    1994 Lincoln Town Car. 98-02 front brakes, P71 steering and sway bars, Eaton swap build underway using TorkTech 4.6 2v intake kit.
    2011 Infiniti M37x
    2004 F250, v10 6 speed manual. ex-US Forest Service truck
    2000 BMW M5
    1976 Jeep DJ5 (postal)

  13. #13
    Join Date
    Jun 2005
    Location
    East Lansing, MI
    Age
    40
    Posts
    3,528
    Quote Originally Posted by Stranger in the Black Sedan View Post
    Show me a shop with a mandrel bender. They are very few and far between.
    Just because there aren't many where you live has nothing to do with anything honestly, here in MI they are all over the place. The guy asking the question is from Saudi Arabia, they may very well have many shops with mandrel benders


    11.90 @ 117.5mph on 93 octane
    324 shortblock, Novi 2000, Now with optional axle removing tires
    Igziabeher

  14. #14
    Quote Originally Posted by Stranger in the Black Sedan View Post
    Show me a shop with a mandrel bender. They are very few and far between.
    Search up MBS in Pasadena, MD. They do FULL mandrel bend. Natehawk had them do his tailpipes and one of my good friends works there.

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  15. #15
    Quote Originally Posted by abmerbati View Post
    i want to change my exhaust and i found this what do you think is it good or there is a better one

    http://www.reinhartperformance.com/M...ategory_Code=9

    and what do you think, does it worth to change my camshaft or not


    I believe Kooks makes the best exhaust for the Marauder, I am installing a set today I will post pictures for you. And I will post before and after dyno runs

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB: Marauder exhaust
    By BigCars4Ever in forum Sunshine State Marauders
    Replies: 3
    Last Post: 07-28-2009, 04:53 PM
  2. Marauder Exhaust
    By jay03merc in forum Exhaust
    Replies: 4
    Last Post: 04-23-2006, 07:14 PM
  3. Marauder Exhaust
    By MAC'n89blckstng in forum Community Discussion
    Replies: 1
    Last Post: 03-21-2006, 06:28 AM
  4. Marauder Exhaust
    By Eric91Z in forum Exhaust
    Replies: 2
    Last Post: 08-18-2005, 07:27 PM
  5. Replies: 20
    Last Post: 05-01-2004, 09:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •