Results 1 to 11 of 11

Thread: My father has commissioned me to pick a supercharger kit for his 01 Mustang Cobra.

  1. #1
    Join Date
    Dec 2006
    Location
    Southern Maryland
    Age
    40
    Posts
    3,507

    My father has commissioned me to pick a supercharger kit for his 01 Mustang Cobra.

    My father is the original owner of his 01 Mustang Cobra. It has a little under 10,000 miles on it. He called me yesterday and is commissioning me to pick a supercharger kit and install it for him. I am very mechanically inclined and have built plenty of engines and transmissions but I have not dealt with boost before. We want to get a complete kit that is going to have every nut and bolt. Performance, quality, and completeness of kit are more important than cost. Once we have the car upgraded I will have it dyno tuned, probably somewhere out here in the CAM area.

    Anyhow he saw an advertisement for a whipple twin screw kit on the back of some car magazine and so he is all excited about that, but I don't really know what is out there for these cars. Oh yeah, it has to run on pump premium.

    Thanks

    Steve
    Steve H., Charles County, MD www.carfap.com
    1994 Lincoln Town Car. 98-02 front brakes, P71 steering and sway bars, Eaton swap build underway using TorkTech 4.6 2v intake kit.
    2011 Infiniti M37x
    2004 F250, v10 6 speed manual. ex-US Forest Service truck
    2000 BMW M5
    1976 Jeep DJ5 (postal)

  2. #2
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    YES! I'm IMing you now!


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  3. #3
    Kenne Bell is the only choice!

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  4. #4
    Join Date
    Dec 2006
    Location
    Southern Maryland
    Age
    40
    Posts
    3,507
    http://www.kennebell.net/supercharge...ra_99-014v.htm

    That'a one eh, w/ the intercooler
    Steve H., Charles County, MD www.carfap.com
    1994 Lincoln Town Car. 98-02 front brakes, P71 steering and sway bars, Eaton swap build underway using TorkTech 4.6 2v intake kit.
    2011 Infiniti M37x
    2004 F250, v10 6 speed manual. ex-US Forest Service truck
    2000 BMW M5
    1976 Jeep DJ5 (postal)

  5. #5
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Quote Originally Posted by ctrlraven View Post
    Kenne Bell is the only choice!

    i told him kenne bell 3.6L or a whipple 4.0L


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  6. #6
    That or a Hellion Turbo kit.
    http://www.hellionpowersystems.com/i...article&id=135

    Quote Originally Posted by offroadkarter View Post
    i told him kenne bell 3.6L or a whipple 4.0L
    Car only needs 2.1L lol

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  7. #7
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Quote Originally Posted by ctrlraven View Post

    Car only needs 2.1L lol
    AHBLEHJABIBJABLEH SSSHHHHHHHHHH!!!!!!!!!!




    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  8. #8
    Join Date
    Jun 2003
    Location
    McDonough, GA
    Posts
    2,394

    Thumbs up Check Here ===

    Check Here ===

    Eaton Powered 01 Cobra
    Check out my Eaton Swap Click-->>http://www.extremehp.com
    Vid Click -->>http://www.extremehp.com
    Full Mod list Click -->> http://www.extremehp.com
    Tuned by Power Surge Performance
    http://www.powersurgeperformance.net/

    The neat thing is that there are a number of Eaton SC available at very good prices from 03/04 Cobra owners who have upgraded to KB, etc.

    Glenn
    Last edited by Glenn; 11-17-2009 at 08:59 AM.
    Trilogy #124 SOLD - 8/2014
    11.80 @ 117.16 MPH: SSHS9
    1.74 sec - 60'
    443 RWHP/437 RWTQ
    "Stock Internal Engine" - Click Below

  9. #9
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    Quote Originally Posted by Glenn View Post
    The neat thing is that there are a number of Eaton SC available at very good prices from 03/04 Cobra owners who have upgraded to KB, etc.

    Glenn
    That is the best option. Then if the '03-'04 Cobra OEM Eaton isn't enough it's easy to upgrade to a Whipple, KB, or now there is even a Vortech twin screw.
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  10. #10
    Join Date
    Dec 2006
    Location
    Southern Maryland
    Age
    40
    Posts
    3,507
    I need a new in box kit for this car and since this is my dad's car I want to do it once. With my own cars I love to try to make things work and constantly tinker but this has to be a complete plug and play kit with no missing parts or surprises.
    Steve H., Charles County, MD www.carfap.com
    1994 Lincoln Town Car. 98-02 front brakes, P71 steering and sway bars, Eaton swap build underway using TorkTech 4.6 2v intake kit.
    2011 Infiniti M37x
    2004 F250, v10 6 speed manual. ex-US Forest Service truck
    2000 BMW M5
    1976 Jeep DJ5 (postal)

  11. #11
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    Quote Originally Posted by Stranger in the Black Sedan View Post
    I need a new in box kit for this car and since this is my dad's car I want to do it once. With my own cars I love to try to make things work and constantly tinker but this has to be a complete plug and play kit with no missing parts or surprises.
    In that case there are few options. I suggest either a Kenne Bell kit or contact Modular Power House and see if you can get a Mongoose Vortech kit from them. I dunno if you can still get a Mongoose kit since MPH is going to close up shop soon and regroup under a new organization in Chicago. Many other vendors will sell a Vortech kit, but the MPH system has some significant improvements over the standard Vortech kit.

    The problem is that both of these kits use a single serpentine belt so you're limited because if you try to up the boost and power you'll have serious belt and tensioner issues.
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mustang Cobra compilation(Think Spring)
    By Hack Goby in forum The Lounge
    Replies: 3
    Last Post: 01-29-2009, 05:02 PM
  2. Supercharger: Eaton M112 blower off a 03 Cobra??
    By MMARAUDER in forum Shop Talk
    Replies: 5
    Last Post: 12-08-2008, 12:54 PM
  3. cobra supercharger on a marauder?
    By coreyyodaddy in forum Shop Talk
    Replies: 9
    Last Post: 01-25-2008, 01:11 PM
  4. Mustang Cobra
    By MACFORD88 in forum The Lounge
    Replies: 11
    Last Post: 11-20-2007, 04:08 AM
  5. Raced a Mustang Cobra
    By NEPatsFan in forum Shop Talk
    Replies: 24
    Last Post: 06-12-2003, 08:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •