Page 1 of 3 123 LastLast
Results 1 to 15 of 37

Thread: Stock subwoofer speaker replacement in OEM enclosure possible?

  1. #1
    Join Date
    Dec 2004
    Location
    Franklinville,NJ
    Age
    52
    Posts
    68

    Stock subwoofer speaker replacement in OEM enclosure possible?

    Sorry everybody. I am sure this has been discussed many times over but can't find threads under all my searches so far. Looking to replace my OEM subwoofer speaker with aftermarket but installing in the OEM enclosure. I thought I read some time ago that there were 2 sub speakers made that would fit the factory enclosure with maybe only minor modification if I'm not mistaken. I don't mind adding a small mono amp if needed but was looking to keep as much of a stock appearance as possible. Any thoughts?
    2004 Silver Birch (Sold 10.20.2008)
    2004 DTR (Sold 2.2.2010)
    2004 Silver Birch (Adopted 2.5.2010)
    This one is a keeper!

  2. #2
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    I took out the OEM unit and installed an Infinity Basslink. No teeth shattering bass but enough for me.

    My install


    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  3. #3
    Join Date
    Dec 2004
    Location
    Franklinville,NJ
    Age
    52
    Posts
    68
    Thanks, I like that idea. Looks nice. How did you mount though? Did you have to drill I assume? I agree with you. Just looking for respectable, nice full quality sound, not trying to rattle the car apart. For example, I also have an '08 F150 that has the factory audiophile set-up. Super sweet!! Just perfect, not overkill but has plenty of lows, mids, and highs all from the factory. That's the kinda solution I am attepting to acomplish here. Thanks for your response, I appreciate it.
    2004 Silver Birch (Sold 10.20.2008)
    2004 DTR (Sold 2.2.2010)
    2004 Silver Birch (Adopted 2.5.2010)
    This one is a keeper!

  4. #4
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Just a simple swap to the 06 Escape audiophile would help you, especially if you hard wire an Ipod to drive it. Plug and play, and looks factory. Thats all I did besides elcheapo kicker 6x8 2 way's and any member who has had a sampling cannot believe how good it sounds now! The Ipod really helps drive a better sound!!
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  5. #5
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,720
    I tried a couple of replacement drivers, best I found was Infinity.
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  6. #6
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by drj02 View Post
    Thanks, I like that idea. Looks nice. How did you mount though? Did you have to drill I assume? I agree with you. Just looking for respectable, nice full quality sound, not trying to rattle the car apart. For example, I also have an '08 F150 that has the factory audiophile set-up. Super sweet!! Just perfect, not overkill but has plenty of lows, mids, and highs all from the factory. That's the kinda solution I am attepting to acomplish here. Thanks for your response, I appreciate it.
    It is secured to the shelf by screws. Have to be careful as the gas tank is located below. Was very careful drilling and used just the right length screws.

    I'd also replace the anemic factory speakers and add tweeters to the front sail panels. A new headunit is also good. I have a Pioneer AVIC-D2.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  7. #7
    Join Date
    Nov 2009
    Location
    Oakbrook, il
    Posts
    2,168
    Quote Originally Posted by justbob View Post
    Just a simple swap to the 06 Escape audiophile would help you, especially if you hard wire an Ipod to drive it. Plug and play, and looks factory. Thats all I did besides elcheapo kicker 6x8 2 way's and any member who has had a sampling cannot believe how good it sounds now! The Ipod really helps drive a better sound!!

    Just wondering if you do fit the Ford Escape cd player would your CD changer still work?

    A legend quote a True Ride can not be no Rider without a Marauder
    Finally Eatonized by ZackZillaaaaaaaaaaa!
    Cardomain link: http://www.CarDomain.com/ride/3380944


    A bank is a place that will lend you money if you can prove that you don't need it

  8. #8
    Join Date
    Apr 2004
    Location
    Greenville, SC
    Posts
    22,513
    Quote Originally Posted by bawazir View Post
    Just wondering if you do fit the Ford Escape cd player would your CD changer still work?
    I don't think so, but here's a link with some extensive info:

    http://www.mercurymarauder.net/forum...ight=escape+CD

    2003 300B DBP
    Build date: 6/19/03
    Number 7,792 of 7,838 - 326 of 328
    Proud member of the MM "BLUES" Bros.
    Purchased: 11/10/05
    Eaton swap by ImpalaSlayer 11-09-10

    Semper et in Aeternum, Mercurius.

    In Memory:
    2004 DTR
    Build Date 01/27/04
    Purchased 04/04/04
    Wrecked 10/19/05, R.I.P.



  9. #9
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    No, it won't, but you now have a 6 disc in dash as a replacement.
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  10. #10
    Join Date
    Sep 2007
    Location
    St. Louis, MO
    Age
    54
    Posts
    189
    For those of you who've used the basslink, do you happen to have the other legs that came with it that allow you to mount it vertically instead of horizontally? I threw mine out years ago when I put my basslink in another vehicle but now I need a pair.

  11. #11
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    Quote Originally Posted by drj02 View Post
    Sorry everybody. I am sure this has been discussed many times over but can't find threads under all my searches so far. Looking to replace my OEM subwoofer speaker with aftermarket but installing in the OEM enclosure. I thought I read some time ago that there were 2 sub speakers made that would fit the factory enclosure with maybe only minor modification if I'm not mistaken. I don't mind adding a small mono amp if needed but was looking to keep as much of a stock appearance as possible. Any thoughts?
    Go with the Pioneer 8" shallow sub Model#ts-s841d it will fit with a little tweaking and you can keep the stock amp and enclosure.

  12. #12
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by hidperf View Post
    For those of you who've used the basslink, do you happen to have the other legs that came with it that allow you to mount it vertically instead of horizontally? I threw mine out years ago when I put my basslink in another vehicle but now I need a pair.
    I'll check, but I think I threw them out.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  13. #13
    Join Date
    Feb 2007
    Location
    Longwood, FL
    Age
    61
    Posts
    604
    Pioneer TS-SW841D is the full part #.
    2003 300B
    VIN: 677166, #6738 of 7839
    built: 2/13/03
    wrty start: 5/28/03
    69,810 miles @ adoption from Marauder57 02/21/07
    84,197 on 02/21/08
    95,776 on 02/21/09
    109,301 on 02/21/10
    121,447 on 02/21/11
    125,925 on 02/26/12
    130,375 on 01/01/13
    134,831 on 2/4/14
    149,441 on 2/24/18
    Dark Blue Pearl, #128 of 327

    Inherited mods: 4.10's, 180 'stat, Addco Rear Sway Bar, Ceramic-coated Cobra Manifolds, DR's X-Pipe kit w/hi-flow cats, KVR X-Drilled Brake Rotors (rear), PI 3000 TC, DR's Tranny Upgrade 1.5, DR's Rear Engine Cooling Mod, Metal Matrix Drive Shaft, Zack-Mack Rear U&L Control Arms.

    My mods: aluminum lower grill screen, tranny cooler, DR's NoIC Novi SL 1200 S/C kit self-installed 8/11-8/14/08, Zack's tranny tune, dyno tuned by Justin Starkey @ VMP Tuning: 447 RWHP/386 RWTQ. DDM 5000k HIDs, KB BAP w/upgraded wiring, RacerX modded FPDM, front springs cut 1.25 coils

  14. #14
    Join Date
    Aug 2009
    Location
    edmonton, alberta
    Age
    38
    Posts
    824
    hey I noticed when you hit preset 3 and 6 together it plays each speaker seperetly and sub 1 is hooked up and when it says sub 2 nothing, we have 2 outputs for subs?

  15. #15
    Join Date
    Mar 2007
    Location
    Hawaiian Islands
    Age
    60
    Posts
    1,943
    Great info...

    Thanks guys!

    Aloha


    '03 A Build Date 8/02
    F.I.T. #6 ***RESURRECTED***
    *444 RWHP / 401 RWTQ
    *10 lbs. Boost
    *P1SC1 ProCharger
    *SCT Tuned *SCT Big Air 2400 MAF *BAP *GT 40 Fuel Pump *Modified FPDM *SSW Headers *MMX Drive Shaft *Metco Drive Shaft Loop *Metco Control Arms *T/A Stud Girdle w/ Diff Cover *Addco Sway Bars 3,500 Stall B/C Auto. Torque Converter *J-Mod *Wilwood 13" Big Brake Kit *Brembo Drilled/Slotted Rotors (Rear) *Widened Rims w/ 295 Nitto 555 *Autometer Wide Band A/F

    When I turn on my car...It returns the favor

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale Stock sub, enclosure, and amp
    By mherman18 in forum Marauder-specific Parts for Sale
    Replies: 3
    Last Post: 01-10-2010, 08:48 AM
  2. For Sale OEM Radio, subwoofer (amp and enclosure)
    By jjsrant in forum Marauder-specific Parts for Sale
    Replies: 3
    Last Post: 09-18-2009, 11:35 PM
  3. Has anyone upgraded their subwoofer speaker?
    By GeoffK in forum Shop Talk
    Replies: 13
    Last Post: 11-21-2008, 11:11 AM
  4. Replacement for factory sub speaker
    By SID210SA in forum Community Discussion
    Replies: 6
    Last Post: 03-29-2006, 07:54 AM
  5. speaker replacement
    By joflewbyu2 in forum Community Discussion
    Replies: 15
    Last Post: 04-11-2003, 04:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •