I agree that the blacked out look is waaaaay cool!
Does the tape that has been discussed come off esily enough if you wanted to return the car to stock or if you messed up applying it ?
Leave the chrome window trim just the way it is... I prefer it chrome!
Black out the window trim... It adds to the badness of the Marauder!!
I agree that the blacked out look is waaaaay cool!
Does the tape that has been discussed come off esily enough if you wanted to return the car to stock or if you messed up applying it ?
Built in Canada... and proud of it!
Don't feel any different today, than I did six months ago, a year ago, or will when it's two years ago a short time from now.
Define easyOriginally Posted by 89VERT
-serious-
You can remove the tape by peeling it off, however, some remnants will remain along with some adhesive residue. This is easily removed with (say) mineral spirits and elbow grease.
-/serious-
It's too close to call. These Bad boys just look too good anyway
03 Marauder 300A, 6 CD Changer, tint, SS Inserts, McGard wheel locks, Full Stainless Works 3 inch exaust and long tube headers, DynoTech MMX driveshaft, Spoiler, Full godshead treatment, Mack & Marty fender badges, Mac & Zack Control arms, KB dead pedal, Adco rear sway bar, 4.10's, FIT/ProCharger Racing Team Member #019(Mine)
04 DTR Cd Changer, moon roof, heated seats, trunk organizor, McGard wheel locks,
SS Inserts, Spoiler, tint, godshead stearing wheel badge, Badgless Grill & trunk, Densos & 180 t-stat, Megs Resonator Delete Tips, Flowmaster 40's, Mac & Zack Control arms, KB dead pedal, Adco rear sway bar, Superchips 9100 SCT tuner, JTL CAI, and 4.10's. (hers)
67 Galaxie 500
96 F250 EXT Cab 4X4 Pwerstroke
2013 Lowe SS210
98 Mustang convertible
2005 Sportcoach Cross Country 376DS
LOL, True very true ....
I got to admit that looks sweet. But then again my favorite color is Chrome!
03 Mercury Marauder OG
DR performance chip
180 degree T-stat
Ford Motorsport 4:10s
Jlt CAI
Steeda Underdrive pullies
Custom exhaust
Zex wet Nitrous
SS inserts
20% back 35% front tint
Ford rear spoiler
I haven't changed my mind either. I still prefer the chrome.
2003 Marauder 300B,
6468 out of 7839 - Thanks Brian
Heated Seats
35% Tint
Mercury All Weather Mats
Trunk Organizer - Thanks MartyO
Sold 4/3/2009 Now resides in AL.
1961 Pontiac Bonneville Convertible
1973 Oldsmobile Toronado
2012 Kia Sedona Van
2008 Corvette Convertible
2003 Marauder 300 A Thanks Larry O 6/14/17
2021 Prius Prime Limited
2023 Chevrolet Silverado High Country
Member # 440
----- John
Chrome
Smokie
12.79 @ 107 mph.
60' 1.851 Street tires & Stock wheels.
TIMESLIPS
Performance Mods: Base Trilogy Kit, Exhaust, PHP Airbox.
Visit my Garage
Florida "The Supercharged State"
What exactly is it called at Auto Zone? Also, how would you apply this "tape", without overlapping it or having any lines in it where the pieces join? It seems like that would be pretty tricky. I prefer the blacked out look! It certainly adds to the attitude of the car!Originally Posted by CRUZTAKER
If I decided to paint mine, how would one go about doing that? I mean, can it be removed from the rubber trim, or does it need to prepped just like it is, and painted?
03 MM, black
Full 2.25" exhaust, 18" Magnaflows, X-pipe
removed rear pair of cats
K&N panel filter w/ silencer delete
Silverstars
Best et: 14.61@96.70
First of all, the trim doesn't come off the car. So if you paint, you're masking....and as long as you're masking....try your hand at blackout tape first
There is only one place that there is an overlap. The widest turn spot on the rear of the back door. If you have a good eye, it can be cut and mated without an overlap. I was in a hurry, I overlapped. Plus, mine was a test for Ennis, I bought extra to re-do it later when I have more patience.
The only trick I have to offer is NOT using a blade, exacto knife, or any other tool to trim the tape on the narrow spots. Use a really sharp finger nail.
The rubber around the trim is subseptible to catching the blade, and all of a sudden you are cutting into the rubber without even knowing. Just run your nail back and forth across the seams until the tape is cut. The fingernail technique is great, and doesn't cut anything except the tape.
Product info:
2017 Niro
Cool, Thanks! I think I'll give it a try!
03 MM, black
Full 2.25" exhaust, 18" Magnaflows, X-pipe
removed rear pair of cats
K&N panel filter w/ silencer delete
Silverstars
Best et: 14.61@96.70
A while back I was offering tape kits to black-out the side window trim; essentially I had tape left-over from doing mine.
The kits sold ( Thank You to all the previous buyers ) and the tape ran-out. A few members here have tapped me for kits, however, here's the information to do your own ( buddy-up to save some $$$$$ ) ..... *Yep, giving away all the trade-secrets
3M Scotchcal™ Striping Tape - Product information
73302 - 3/8" x 150' window trim top ~$19
72702 - 1/2" x 150' window trim bottom ~$25
77102 - 2" x 50' window trim rear + door handle trim ~$34
*Note - The above lengths are the smallest available; all can be purchased at CarQuest, though they may have to order it ( and that takes about a week ).
*And "No" the shiny spots aren't the chrome showing, it's a reflection from the camera's flash.
^^^nice post!^^^
That's alot more effort I put into the explaination, and I am sure many folks appreciate it as well.
2017 Niro
Great info! Thank you very much!!
03 MM, black
Full 2.25" exhaust, 18" Magnaflows, X-pipe
removed rear pair of cats
K&N panel filter w/ silencer delete
Silverstars
Best et: 14.61@96.70
looks like a stelph machine ready to stomp on something. looks great!
2006 GTO. Lingenfelter CAI, V-Max Polished Throttlebody, Vararam TB Spacer, SLP Ceramic LT Headers, SLP High Flow Cats, Custom X Pipe, QTP electric Cutouts, Flowmaster 40 Mufflers, Livernoise Stage 2 Heads and Comp Cam Stage 2 Cam 232/232 .050 @ 114 lsa, custom built transmission with a pro torque 2800 stall. HOPE I HIT LOW 12'S OR HIGH 11'S , CAUSE IM A BROKE MO FO! SOLD
There are currently 1 users browsing this thread. (0 members and 1 guests)