Both, you will die stronger.
Both, you will die stronger.
~But, it makes it a lot easier when he is manscaped.~ Haggis
~Cool, I can have one of those strangulation orgasms without the strangle.
WIN WIN!~ Zack
~Who needs to stop? I just wanna gooooooooooo ~ -Matt-
Getting MM ready for trip to TX Saturday, decided to replace Trilogy accessory belt given the blower belt snapped last summer (trashed my perfect OEM hood liner! ) and check all the pulley bearings.
All was good with the exception of the Trilogy small ribbed idler pulley bearing - just starting to make a little noise.
Could not locate the Dayco 89095 and no time to order but found out the Gates 36079 is nearly identical (about 1/8th" larger in diameter) according to Gates cross reference (https://ww2.gates.com/if/automotive/...ange/index.cfm).
Ordered and picked up today on way home from office and reassembled.
All good now!!! She sings!
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
Decided to attempt polishing up my yellowing headlites with Mothers Aluminum wheel polish. Had a modicum of success. Not as clear as the YouTube video results, but at least now I can see the bulbs inside. I tried by hand and got the results I got. Going to try again with a polishing attachment thingy for the portable power drill and see if that will polish them the rest of the way. Sorry I didn't get pics, but it does seem to work. Will post up after I try the drill.
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
Had a problem start up last month of driving last year. While cruising at speed the car would very slightly surge forward and back quickly, like a buck or slight engine miss. It felt like fuel starvation? The issue was so slight most would not notice but after 40 years of being a wrench I am so in tune with my vehicles it was a glaring issue in my eyes. I had been wanting to replace the COPs so used this as an excuse. So: new plugs, new COPs from Tommy at Sparta, installed fuel pressure gauge. Still did it, fuel pressure was very erratic so installed modded FPDM I had sitting around waiting to be installed. erratic pressure cured but drivability issue still present. I had a new FRPS in the glove box for emergency after witnessing a member have one go out at a Marauderville so installed it. BINGO! that was the issue. All fixed. :-)
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
Drove it and had fun!
2004 Black Marauder: #2237 Born on 4/1/2004
Eaton Swapped and a bunch of other goodies!
I LOVE Jerry's bar, it's my kinda place...........
When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.
"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "
Trilogy # 192 / T.S. 0012
BOOST GETS YOU FELONY STOPPED!!!
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
I LOVE Jerry's bar, it's my kinda place...........
When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.
"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "
Trilogy # 192 / T.S. 0012
BOOST GETS YOU FELONY STOPPED!!!
used VP fuel system cleaner. VP racing has good products (knock on wood) I used the coolant and it lowered the marauder's operating temp by 6-10 degrees
Thank God for freedom, thank god for America
Car had constant squeaking in the front end going ~20mph. Couldn’t figure it out for the life of me.
Went onto crownvic.net and lo and behold the solution to my problem was greasing up the striker wire of the hood. She’s silent now.
Still in awe that that was causing the insufferable squeaking.
Sent from my iPhone using Tapatalk
2003 300B Mercury Marauder
Built 01/22/03
Purchased 01/29/20
68,xxx miles
July 12, 2023 - 68,203 Miles - RIP original engine
October 31, 2023 - Rebuilt engine installed
Modifications/Stuff I have done on the car:
Engine:
rebuilt stock; slightly overbore. Original 68k mile heads, new OEM Ford performance timing kit, Terminator Cobra Oil Pump, Billet Steel oil pump gears, ARP head studs, main cap studs, and side bolts. The latter ARP stuff for future endeavors.
Transmission:
Thor 2800-3000 Stall Converter
Suspension:
ADTR Front + Rear Sway Bars
Metco Billet Watts Link
Metco Billet Rear Control Arms
Cosmetic:
1998-2003 Amber tail lamp conversion - Painted and smoked to near-OEM spec.
HID Projector Headlamp Retrofit
OEM Mercury Mountaineer Hitch Cover
Front in-channel rain guards
Other Stuff:
4-pin trailer harness
Class III Tow Hitch
Cadillac 4-note horns
Hayden 679 Transmission Cooler
Obligatory Marty Tune
Wasn't today, but the other day I finally managed to get the dead battery out when the holddown bolt snapped. Kinda half-assed holding in the spare battery for now.
"Beast, Jr."
2003 300 A, 4.10:1 gear, JLT CAI, Marty tune, Nitto 420S and 555 tires, NGK TR55 plugs, J-mod, Skull lock knobs, and a new windshield
There are currently 11 users browsing this thread. (0 members and 11 guests)