Page 2 of 38 FirstFirst 12345678912 ... LastLast
Results 16 to 30 of 568

Thread: Eaton Swap Parts List Thread

  1. #16
    Join Date
    Oct 2009
    Location
    Louisiana
    Age
    57
    Posts
    518
    Quote Originally Posted by swordfish View Post
    I'll add the cobra cooling tube and bolts. for under the intake
    Cooling tube F8ZZ-18B402-BA
    Screw N807959-S309
    Bolt N807309-S437
    This tube under the intake.
    Mark E. Sword
    1964 Falcon AFX clone (Rommy Hammes)
    1970 1/2 Falcon Cobra
    2003 Marauder DPB #5 of 328
    http://www.mercurymarauder.net/forum...ad.php?t=63629

  2. #17
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    Got it, thanks for the clarification.

  3. #18
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    Quote Originally Posted by bob6364 View Post
    You will need to cut and weld the original water crossover tube
    or use the Cobra cooling tube and bolts.
    Cooling tube F8ZZ-18B402-BA
    Screw N807959-S309
    Bolt N807309-S437
    This is confusing. Sould read something like this:

    You will need to cut and weld to make a coolant crossover tube by combining the original crossover tube with a Cobra crossover tube.

    Heater coolant return tube: Either smash the OEM one with a hammer so it clears the lower intake or replace it with this one that fits properly:
    Cooling tube F8ZZ-18B402-BA
    Screw N807959-S309
    Bolt N807309-S437
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  4. #19
    Join Date
    Nov 2007
    Location
    Eastern,Connecticut
    Age
    59
    Posts
    1,673
    I was partway with the update when the mrs call out "supper"...so off I went I forgot about that nasty little tube under the intake thanks....
    Originally Posted by LIGHTNIN1
    ... As for the rest of the Washigton crowd, I think we would be better off in the hands of the Somali Pirates.

    2004 Black Mercury Marauder
    2057 of 3213
    K&N CAI
    Lidio 93 Octane Tune
    4.10 FRPP Gears
    MagnaFlow SS Mufflers and Tips
    Fuel Filter Upgrade Motorcraft FG800A or equivalent
    Ford part number N807055S hood squeak fix
    >>>>>>>>>>>>>>> ASK FOR MOTORCRAFT OIL AND FILTER WHEN GETTING YOUR OIL CHANGED AT A FORD GARAGE <<<<<<<<<<<<<<<<<<

  5. #20
    Join Date
    May 2007
    Location
    Massapequa Park
    Posts
    585
    Just need to modify the marauder crossover, you dont need the cobra tube and the marauders. You can do it with both though if you wanted. I followed impalaslayers example shortened the factory crossover about an inch in height and length. Welded up the end that ataches to the thermostat, removed and rewelded the mounting tabs to the botom of the crossover so they bolt to the heads, moved the the other coolant hose nipple(the barb on the passenger side of the crossover tube) so it doesnt hit the belt tensioner. I made a tee from a couple of metal hosebarbs from the hardware store belive there 1.5 barbs. The tee conects the upper radiator hose to the thermostat.

  6. #21
    Join Date
    Nov 2007
    Location
    Eastern,Connecticut
    Age
    59
    Posts
    1,673
    ok everyone refresh...see how that looks
    Originally Posted by LIGHTNIN1
    ... As for the rest of the Washigton crowd, I think we would be better off in the hands of the Somali Pirates.

    2004 Black Mercury Marauder
    2057 of 3213
    K&N CAI
    Lidio 93 Octane Tune
    4.10 FRPP Gears
    MagnaFlow SS Mufflers and Tips
    Fuel Filter Upgrade Motorcraft FG800A or equivalent
    Ford part number N807055S hood squeak fix
    >>>>>>>>>>>>>>> ASK FOR MOTORCRAFT OIL AND FILTER WHEN GETTING YOUR OIL CHANGED AT A FORD GARAGE <<<<<<<<<<<<<<<<<<

  7. #22
    Join Date
    Nov 2007
    Location
    Eastern,Connecticut
    Age
    59
    Posts
    1,673
    Quote Originally Posted by tjl006 View Post
    Just need to modify the marauder crossover, you dont need the cobra tube and the marauders. You can do it with both though if you wanted. I followed impalaslayers example shortened the factory crossover about an inch in height and length. Welded up the end that ataches to the thermostat, removed and rewelded the mounting tabs to the botom of the crossover so they bolt to the heads, moved the the other coolant hose nipple(the barb on the passenger side of the crossover tube) so it doesnt hit the belt tensioner. I made a tee from a couple of metal hosebarbs from the hardware store belive there 1.5 barbs. The tee conects the upper radiator hose to the thermostat.
    Hmmm...I guess if the name of the game is get superchargered for short money and the cobra tube really isn't needed maybe I should delete it.
    Originally Posted by LIGHTNIN1
    ... As for the rest of the Washigton crowd, I think we would be better off in the hands of the Somali Pirates.

    2004 Black Mercury Marauder
    2057 of 3213
    K&N CAI
    Lidio 93 Octane Tune
    4.10 FRPP Gears
    MagnaFlow SS Mufflers and Tips
    Fuel Filter Upgrade Motorcraft FG800A or equivalent
    Ford part number N807055S hood squeak fix
    >>>>>>>>>>>>>>> ASK FOR MOTORCRAFT OIL AND FILTER WHEN GETTING YOUR OIL CHANGED AT A FORD GARAGE <<<<<<<<<<<<<<<<<<

  8. #23
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    Quote Originally Posted by tjl006 View Post
    Just need to modify the marauder crossover, you dont need the cobra tube and the marauders. You can do it with both though if you wanted. I followed impalaslayers example shortened the factory crossover about an inch in height and length. Welded up the end that ataches to the thermostat, removed and rewelded the mounting tabs to the botom of the crossover so they bolt to the heads, moved the the other coolant hose nipple(the barb on the passenger side of the crossover tube) so it doesnt hit the belt tensioner. I made a tee from a couple of metal hosebarbs from the hardware store belive there 1.5 barbs. The tee conects the upper radiator hose to the thermostat.
    I'd like to see Zack's new idea on this piece...
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  9. #24
    Join Date
    May 2007
    Location
    Massapequa Park
    Posts
    585
    I would also like to hear zacks idea does it involve any parts from evenflow?

  10. #25
    Join Date
    Nov 2007
    Location
    Eastern,Connecticut
    Age
    59
    Posts
    1,673
    I will be afkb for an hour...have to powder coat a bracket for someone....
    Originally Posted by LIGHTNIN1
    ... As for the rest of the Washigton crowd, I think we would be better off in the hands of the Somali Pirates.

    2004 Black Mercury Marauder
    2057 of 3213
    K&N CAI
    Lidio 93 Octane Tune
    4.10 FRPP Gears
    MagnaFlow SS Mufflers and Tips
    Fuel Filter Upgrade Motorcraft FG800A or equivalent
    Ford part number N807055S hood squeak fix
    >>>>>>>>>>>>>>> ASK FOR MOTORCRAFT OIL AND FILTER WHEN GETTING YOUR OIL CHANGED AT A FORD GARAGE <<<<<<<<<<<<<<<<<<

  11. #26
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    Quote Originally Posted by bob6364 View Post
    Throttle Bracket 2R3Z9728BA and Cable 2R3Z9A758AA

    Intercooler pump (new or used doesn't matter)
    I used my MM cable, did others have to switch?

    Gotta come up with some sort of bracket for the pump.

    Need an intercooler reservoir & cap and some sort of bracket for it.
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  12. #27
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    Quote Originally Posted by tjl006 View Post
    I would also like to hear zacks idea does it involve any parts from evenflow?
    Im gonna start experimenting in about 2 weeks.

  13. #28
    Join Date
    Nov 2007
    Location
    Eastern,Connecticut
    Age
    59
    Posts
    1,673
    Wow this is going good...more,more gimmee more.
    Originally Posted by LIGHTNIN1
    ... As for the rest of the Washigton crowd, I think we would be better off in the hands of the Somali Pirates.

    2004 Black Mercury Marauder
    2057 of 3213
    K&N CAI
    Lidio 93 Octane Tune
    4.10 FRPP Gears
    MagnaFlow SS Mufflers and Tips
    Fuel Filter Upgrade Motorcraft FG800A or equivalent
    Ford part number N807055S hood squeak fix
    >>>>>>>>>>>>>>> ASK FOR MOTORCRAFT OIL AND FILTER WHEN GETTING YOUR OIL CHANGED AT A FORD GARAGE <<<<<<<<<<<<<<<<<<

  14. #29
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    Extra Battery Tray, Battery Cable

    I used a different battery altogether, but I think Dave was able to use the stock battery.

  15. #30
    Join Date
    Nov 2007
    Location
    Eastern,Connecticut
    Age
    59
    Posts
    1,673
    Quote Originally Posted by Zack View Post
    Extra Battery Tray, Battery Cable

    I used a different battery altogether, but I think Dave was able to use the stock battery.
    I was just thinking the same thing zack...also i'm going to start injecting pics....i will rezize them and neaten up as we go along
    Originally Posted by LIGHTNIN1
    ... As for the rest of the Washigton crowd, I think we would be better off in the hands of the Somali Pirates.

    2004 Black Mercury Marauder
    2057 of 3213
    K&N CAI
    Lidio 93 Octane Tune
    4.10 FRPP Gears
    MagnaFlow SS Mufflers and Tips
    Fuel Filter Upgrade Motorcraft FG800A or equivalent
    Ford part number N807055S hood squeak fix
    >>>>>>>>>>>>>>> ASK FOR MOTORCRAFT OIL AND FILTER WHEN GETTING YOUR OIL CHANGED AT A FORD GARAGE <<<<<<<<<<<<<<<<<<

Page 2 of 38 FirstFirst 12345678912 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Eaton Swap
    By tjl006 in forum Power Adders
    Replies: 96
    Last Post: 02-17-2010, 09:30 AM
  2. Eaton swap marauder on ebay
    By tjl006 in forum Community Discussion
    Replies: 37
    Last Post: 01-31-2010, 02:49 PM
  3. thanks to gortch for the eaton swap brackets!!
    By ImpalaSlayer in forum Community Discussion
    Replies: 25
    Last Post: 09-07-2009, 04:45 PM
  4. Looking to swap in an Eaton?
    By O's Fan Rich in forum The Lounge
    Replies: 12
    Last Post: 04-10-2009, 06:57 PM
  5. Good start on an Eaton Swap
    By bob6364 in forum Other Parts for Sale
    Replies: 4
    Last Post: 01-05-2009, 09:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •