Eaton Swap Parts List Thread

[swordfish]

I'll add the cobra cooling tube and bolts. for under the intake
Cooling tube F8ZZ-18B402-BA
Screw N807959-S309
Bolt N807309-S437

This tube under the intake.

[Zack]

Got it, thanks for the clarification.

[FordNut]

You will need to cut and weld the original water crossover tube
or use the Cobra cooling tube and bolts.
Cooling tube F8ZZ-18B402-BA
Screw N807959-S309
Bolt N807309-S437

This is confusing. Sould read something like this:

You will need to cut and weld to make a coolant crossover tube by combining the original crossover tube with a Cobra crossover tube.

Heater coolant return tube: Either smash the OEM one with a hammer so it clears the lower intake or replace it with this one that fits properly:
Cooling tube F8ZZ-18B402-BA
Screw N807959-S309
Bolt N807309-S437

[bob6364]

I was partway with the update when the mrs call out "supper"...so off I went I forgot about that nasty little tube under the intake thanks....

[tjl006]

Just need to modify the marauder crossover, you dont need the cobra tube and the marauders. You can do it with both though if you wanted. I followed impalaslayers example shortened the factory crossover about an inch in height and length. Welded up the end that ataches to the thermostat, removed and rewelded the mounting tabs to the botom of the crossover so they bolt to the heads, moved the the other coolant hose nipple(the barb on the passenger side of the crossover tube) so it doesnt hit the belt tensioner. I made a tee from a couple of metal hosebarbs from the hardware store belive there 1.5 barbs. The tee conects the upper radiator hose to the thermostat.

[bob6364]

ok everyone refresh...see how that looks

[bob6364]

Just need to modify the marauder crossover, you dont need the cobra tube and the marauders. You can do it with both though if you wanted. I followed impalaslayers example shortened the factory crossover about an inch in height and length. Welded up the end that ataches to the thermostat, removed and rewelded the mounting tabs to the botom of the crossover so they bolt to the heads, moved the the other coolant hose nipple(the barb on the passenger side of the crossover tube) so it doesnt hit the belt tensioner. I made a tee from a couple of metal hosebarbs from the hardware store belive there 1.5 barbs. The tee conects the upper radiator hose to the thermostat.

Hmmm...I guess if the name of the game is get superchargered for short money and the cobra tube really isn't needed maybe I should delete it.

[FordNut]

Just need to modify the marauder crossover, you dont need the cobra tube and the marauders. You can do it with both though if you wanted. I followed impalaslayers example shortened the factory crossover about an inch in height and length. Welded up the end that ataches to the thermostat, removed and rewelded the mounting tabs to the botom of the crossover so they bolt to the heads, moved the the other coolant hose nipple(the barb on the passenger side of the crossover tube) so it doesnt hit the belt tensioner. I made a tee from a couple of metal hosebarbs from the hardware store belive there 1.5 barbs. The tee conects the upper radiator hose to the thermostat.

I'd like to see Zack's new idea on this piece...

[tjl006]

I would also like to hear zacks idea does it involve any parts from evenflow?

[bob6364]

I will be afkb for an hour...have to powder coat a bracket for someone....

[FordNut]

Throttle Bracket 2R3Z9728BA and Cable 2R3Z9A758AA

Intercooler pump (new or used doesn't matter)

I used my MM cable, did others have to switch?

Gotta come up with some sort of bracket for the pump.

Need an intercooler reservoir & cap and some sort of bracket for it.

[Zack]

I would also like to hear zacks idea does it involve any parts from evenflow?

Im gonna start experimenting in about 2 weeks.

[bob6364]

Wow this is going good...more,more gimmee more.

[Zack]

Extra Battery Tray, Battery Cable

I used a different battery altogether, but I think Dave was able to use the stock battery.

[bob6364]

Extra Battery Tray, Battery Cable

I used a different battery altogether, but I think Dave was able to use the stock battery.

I was just thinking the same thing zack...also i'm going to start injecting pics....i will rezize them and neaten up as we go along