or borrow a Full set OEM Brake Calipers and brackets
I'm looking for a complete set of OEM brake calipers including the mounting brackets. I want to get a set and strip them down for powder coating, get them coated, and then rebuild them with new seals, slide pins,, hardware, rubber boots, etc...
If someone has a set they can live without for a few months, I would be willing to rebuild the set I take of my car and return them fully rebuilt to whomever would let me use their set for my powder coating and rebuild project. I would also be willing to paint them if you supply the materials such as the G2 kit (I won't use the Duplicolor as I have had problems in the past).
I am also willing to buy a set as long as the price isn't to high as I will be stripping them down to be rebuilt anyways. On Rock Auto a fully rebuilt setup will only cost about $200 + shipping (not including pads).
Thanks.
04 SB MM RIP 4/24/09
Number 553 of 3213 04s, 208 of 993 Silvers 04s
03 SB MM (the new girl)
Born 5/15/2003, Adopted 7/17/09
Number 7458 of 7838 03s, 225 of 417 Silver 03s
Mods: K&N CAI, 180° stat, SW headers, custom 2.5" h-pipe exhaust from headers to tips w/Dynomax VT mufflers, Part of the Art Carr Stage 2 tranny kit, rebuilt with Alto Black bands and clutches, deep transmission pan, big ass trans cooler, PI 3.5k rpm Triple disk TC, Dynotech 4" driveshaft, Metco Drive shaft loop and rear CA's, Addco front and rear sway bars, just a bit of powder coating, stock size performance brake upgrades, QA1 shocks in the rear with KYBs in the front, and replaced every stock suspension bushing. Tuner's Inc tuned 298 rwhp/306 rwtq.