Widened wheel spacers

[DOOM]

What size spacer are you guys using for your widened marauder wheels?

What's the part# and where do you get them from?

[Bradley G]

I don't think they require spacers as long as you keep the 9.5" wheel width.

[RR|Suki]

Some will need spacers to fit 305 wide tires on the widened rims, I know they would rub pretty bad for me, seeing as my 295s rub a bit

[DTUB]

1/4 inch..

[Bradley G]

Thanks for the info , My 295's don't rub

Some will need spacers to fit 305 wide tires on the widened rims, I know they would rub pretty bad for me, seeing as my 295s rub a bit

[fastblackmerc]

Not using any spacers.

[DOOM]

Some will need spacers to fit 305 wide tires on the widened rims, I know they would rub pretty bad for me, seeing as my 295s rub a bit

Yes I'm running 305's.

Where do you get them from?

Part#/Price?

[FordNut]

No spacers 295 or 305. QA1's.

[Sully008]

I'm using these:

http://www.maximummotorsports.com/st...roducts_id=576

Running MT ET Street IIs, 305-45-18s on 9.5" widened stock wheels. There was very slight rubbing on the stock shocks without them. YMMV, though. There are some cars out there that don't need them.

[DOOM]

I'm using these:

http://www.maximummotorsports.com/st...roducts_id=576

Running MT ET Street IIs, 305-45-18s on 9.5" widened stock wheels. There was very slight rubbing on the stock shocks without them. YMMV, though. There are some cars out there that don't need them.

Thanks!

This is exactly what i was looking for.

[MOTOWN]

just curious has anyone widened to ten inches on the stock wheel?, im considering it, i no ill need a 1/4" spacer

[RR|Suki]

just curious has anyone widened to ten inches on the stock wheel?, im considering it, i no ill need a 1/4" spacer

I seem to remember it has been measured, and won't work. Easy way to find out is to measure (with the wheel on) from lip to shock/shock mounts and control arms. First with the the wheel tucked and then with the axle hanging and see if there's 2" to spare, or 1.75" even. Good luck.

[MOTOWN]

I seem to remember it has been measured, and won't work. Easy way to find out is to measure (with the wheel on) from lip to shock/shock mounts and control arms. First with the the wheel tucked and then with the axle hanging and see if there's 2" to spare, or 1.75" even. Good luck.

thanks ill give it a try

[Smalldogg/03mm]

Hey cam one of guys send a pic of ur mm sitting on those 300s(tires) was thinking about, RESPECT

[Joe Walsh]

My Nitto P295s on widened 9.5" rims clear the shocks with no rubbing (@ 1/4" clearance)
With the P305 Nitto DRs, one side slightly rubs the inside sidewall on the shock.