Who makes the best for us. It's about time again.
Senior Member
Who makes the best for us. It's about time again.
300A
born 08-27-02
Adjusted air in and air out.
400+ timeslips.
When in doubt, GAS IT! This will either fix the problem, or end the suspense.
SSDD
Napa Premium Series, I was told here, and I use them.
"A street walking cheetah, with a heart full of napalm."
"If You can keep Your Head About You, While Others are Losing Theirs and Blaming It on You..."
"Sometimes it is wiser to remain silent, and seem a fool, than to speak, and remove all doubt."
"We've been looking for the enemy for some time now. We've finally found him. We're surrounded. That simplifies things."[5]
Molon Lahve
Centric 105 series, low dust, no noise.
FRPP dealer owner of SpartaPerformance.com
We are an authorized independent AMSOIL dealer.
Senior Member
Originally Posted by SpartaPerformance
Where would one find these?
300A
born 08-27-02
Adjusted air in and air out.
400+ timeslips.
When in doubt, GAS IT! This will either fix the problem, or end the suspense.
Alexis Texas' #1 fan
how about Ford OE?
Curator of Speed
Hey Paul~ Scott Levine always told me to go with Performance Friction Brand pads. AutoZone or Advance Auto carries em.
These are the pads I run on the Baer kit, and they work well. Good intermediate pad (stop decent when cold, or warm) They run about $38 a pair. Hope this helps.
GAMike
2003 Black on Charcoal 300A W/90K (RIP 7-17-08)
5-9-09 Now Keeper of the Pristine and Ledgendary:
Trilogy # 73 Known in Metro Atlanta as "The Banshee"
Courtesy of Bigslim, and SidewaysCoupe
All options that came on an 04 SB & a boatload of .......... Never mind... It would take too long.
12.73 @ 107.9 & 1.79 60' at SSHS9
Molon Lahve
Any good auto parts store (one that doesn't just carry it's own brands). Rockauto has them Centric part# 10509310
Brake pads
FRPP dealer owner of SpartaPerformance.com
We are an authorized independent AMSOIL dealer.
Senior Member
Hawk HPS is what I'm running.
Just another Marauder owner
Hawk HPS. They have been my oh choice for street (and occasional track use) for a long time.
Previous
2003 DPB 232 fo 328.
broke but not dead!
http://http://www.amazon.com/Aimco-S...362173&sr=1-37
I JUST GOT THESE
2004 Trilogy #93P 12.2@113 Built and stalled
RWD only fan
Napa Ceramix.
(#6178 in black per FPIC)
Call 1-800-FORD-788 and press "1". Have the last 6 of your VIN handy. You will get the numbers for FREE. You'll pay $$$ for the certificate.
MM traded in 8/9/13 @ 128909 miles. It was fun for almost 8 years. I met airmercpun on 1/17/14. He was the new owner of my former ride. -Now gone.
Update: back in the game with a late build 03 GMGS with some MM add ons like Escape audiophile radio w/Sirius sat radio, rear sway bar, catback exhaust, and header panel.
Rest In Peace:
Alex "Marauderboi" Vachon 3/2/92-8/13/10
Paula Babineau 1/9/67-8/2/11
Rex Weinbender
Peter
See my garage file for part numbers and whatnot.
IMHO, this site- the members that I chat with- and the ones that I now Hang with- are like my 2nd family. There is such an ongoing welcome feeling here that even members who don't or no longer own the MM can feel.
PONTIFICATOR
Hey Mike, went on line at Advance to get a set of pads for my 91 Chevy van, saw the ceramic's on sale for 23.99, reg were 38.99. Called the local Advance and he did not have them but could order them cause the warehouse still had a set. He did however say they were discontinuing the Performance Frictioin Brand and that is why they were on sale. Advance may be going out of the Performance Friction Brand business.
OBTW, howdy Paul.
---------------------------------------
2003 Marauder BLACK
SS inserts
Addco sway bars
JLT CAI
4.10's
MO's custom tune
275 rwhp/303 lbs. torque
Curator of Speed
Hey Willie.... Just caught this info. (guess I have been on another planet for the past month)
Thanks for this. I am gonna check in here at my local store and see what they have. May pick up another set just to have em! Hope all is well up in Woodhick country!
GAMike
2003 Black on Charcoal 300A W/90K (RIP 7-17-08
5-9-09 Now Keeper of the Pristine and Ledgendary:
Trilogy # 73 Known in Metro Atlanta as "The Banshee"
Courtesy of Bigslim, and SidewaysCoupe
All options that came on an 04 SB & a boatload of .......... Never mind... It would take too long.
12.73 @ 107.9 & 1.79 60' at SSHS9
Contributing Member
Axxis Metal Master semi-metallic
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
Junior Member
Making a selection of brake pads for a daily performance driver hasn't been easy expecting best results. We all seek the shortest stopping distance in all conditions noise free no dust & long wear. I have had only OEM & Hawk HPS. Unless I hear some convincing info I will go with OEM in the future. I have no clue what oem were made of or what part number.
2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
2003 marauder black 28,000 miles all stock. Garage Queen.
2004 marauder red daily driver.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
