Attachment 27065
Attachment 27066
Attachment 27067
Attachment 27068
Attachment 27069 This is my latest attempt at porting and polishing the TB and plenium...comments are welcome.Racer X ???
Attachment 27065
Attachment 27066
Attachment 27067
Attachment 27068
Attachment 27069 This is my latest attempt at porting and polishing the TB and plenium...comments are welcome.Racer X ???
Last edited by bugsyc; 11-25-2013 at 06:59 AM.
Be careful! Put some painters tape around both sides of the blades and the blade shafts. You don't want aluminum dust in there or you'll be chasing an idle problem for a while. Try not to burr up the flat faces that mate the parts. Using high temp rtv as a gasket will cure that of course. It is a good start! I don't think you'll see much gain from that though. The real key is inside the supercharger itself. You want to practice on other stuff before you do that though.
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Thanks for taking the time to take a look and comment.The tape is a good idea that I will use.It's hard to see but,the polishing came out pretty good,better than I expected..
Pictures never do justice! Something else nice to use is a good set of calipers so you can tell wall thickness when porting. It's much easier to remove more than to put it back! (TIG welding can be fun too)
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Thanks bud,you're the man in P&P matters..... BTW these were sticktly for practice,not going on car...
I will def say I've seen a lot of ported parts in my day and Bill's work is excellent, on par with or better than most I've seen. You've got natural talent, bud!
WHO's Bill?
Bill traded 1 lung for the port and polish!!!!! He does great work.merry Christmas all!!
Thanks for the info...Bill = Racer X.Good to know and yes he is a natural on P&P...I always look to him in such matters.
Wow! Thanks guys! Merry Christamas everyone!
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
There are currently 1 users browsing this thread. (0 members and 1 guests)