Anyone know the part # or where to buy the clips that hold the center gauge pod? Mine broke while taking out the pod.
Also, what is the interior paint code? I need to touch up the gauge pod.
Senior Member
Anyone know the part # or where to buy the clips that hold the center gauge pod? Mine broke while taking out the pod.
Also, what is the interior paint code? I need to touch up the gauge pod.
Senior Member
I was told by my parts guy at ford that if you take the clip to them, they can find one to replace it. even if its broken.
Senior Member
You could check the sticker on the door. That should give you the interior color codeOriginally Posted by J.bo
2004 P-73,100k+
Performance & Handling:
P-71 H-pipe with Flowmaster 50s/Rear Meow delete/ADTR P&P plenum/70mm TB/Marauder swaybars/MZT/BOC tune/J-Mod/ 2006 P-71 rear coils/2005 17" Mustang GT Premium rims with Pirellis
best time: 15.4 @ 91.6mph
Appearance:
Honeycomb color matched grille/lower grille mesh mod/S-55 tail/reverse lights mod/bumper tuck/window chrome and wood dash delete/black reflective rear fascia/side marker mod/15% rear, 35% front tint/Marauder gauge cluster/1999 Lincoln Continental console and floor shift/Marauder gauge pod with "real" Autometer gauges/ Ford Focus driving lights with 5000K HID's wired to Marauder light switch for factory operation/repaired LCM/Marauder corner lights
Florida Cracker in Northern New England
2000 Kawasaki Concours
Senior Member
I found out everything I needed. Thanks.
Senior Member
I have the part number for the clips but my ford parts department said no more available. If you find any out there, please let us know. Also Charchoal paint is no more too.
Senior Member
I can send u a picture of a clip that will work that Ford parts guy gave me to try out. Not the same clip but is more common.
Willing to meet up half way
How about part #? I'll order a bunch of them.
I LOVE Jerry's bar, it's my kinda place...........
When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.
"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "
Trilogy # 192 / T.S. 0012
BOOST GETS YOU FELONY STOPPED!!!
HEMI HUNTER
Yeah what he said!
The KING of BLING!
BOOST GETS YOU IMPERSONATED!
Senior Member
IDK if it helps or not but....while I was changing my front door speakers, I noticed the clips that hold the mirror etchusean(sic) on is the same as the gauge pod.
Searched and still could not find a part number, but it leaves a wider range of vehicles to snag the part from.
2004 P-73,100k+
Performance & Handling:
P-71 H-pipe with Flowmaster 50s/Rear Meow delete/ADTR P&P plenum/70mm TB/Marauder swaybars/MZT/BOC tune/J-Mod/ 2006 P-71 rear coils/2005 17" Mustang GT Premium rims with Pirellis
best time: 15.4 @ 91.6mph
Appearance:
Honeycomb color matched grille/lower grille mesh mod/S-55 tail/reverse lights mod/bumper tuck/window chrome and wood dash delete/black reflective rear fascia/side marker mod/15% rear, 35% front tint/Marauder gauge cluster/1999 Lincoln Continental console and floor shift/Marauder gauge pod with "real" Autometer gauges/ Ford Focus driving lights with 5000K HID's wired to Marauder light switch for factory operation/repaired LCM/Marauder corner lights
Florida Cracker in Northern New England
2000 Kawasaki Concours
Senior Member
Dont have a part #. parts guy just gave them to me for free. i guess I could get it for you if you really need it. here is a picture of the clips in the mean time.
Senior Member
Yes I really need it. Could you get the part number or send me any extras if you have any?
Senior Member
I found this clip at Fastenal online. It looks similar.
Junior Member
W704021-S309 clips for gauge pod
Member
The backlight went out on my voltmeter. How does that come out? Pull the whole thing forward?
Everything Marauder, LEDs & HI
Put the gearshift in Drive
Pull on the sides of the gauge pod
It will sound like your breaking something but it will come out
You should consider replacing BOTH bulbs with LEDs. They are brighter and give off almost no heat. You'll should see the burned marks on the top of each gauge from the incandescent bulbs.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
