junior member
Parts from the engine i had in Purple Panther last year.
Set of 8 marauder coils $60
Flexplate 8 bolt $50
Set of 8 R C Engineering 60#Injectors balanced with calibration report.Cost new $800.Will sell with MAF calibrated for same. $375
Pair of 03 marauder heads complete with Sean Hyland performance cams for S/C.1 plug hole needs helicoil,1 hole has one. $1250
all items plus shipping
RWD only fan
How many miles are on the coils?
(#6178 in black per FPIC)
Call 1-800-FORD-788 and press "1". Have the last 6 of your VIN handy. You will get the numbers for FREE. You'll pay $$$ for the certificate.
MM traded in 8/9/13 @ 128909 miles. It was fun for almost 8 years. I met airmercpun on 1/17/14. He was the new owner of my former ride. -Now gone.
Update: back in the game with a late build 03 GMGS with some MM add ons like Escape audiophile radio w/Sirius sat radio, rear sway bar, catback exhaust, and header panel.
Rest In Peace:
Alex "Marauderboi" Vachon 3/2/92-8/13/10
Paula Babineau 1/9/67-8/2/11
Rex Weinbender
Peter
See my garage file for part numbers and whatnot.
IMHO, this site- the members that I chat with- and the ones that I now Hang with- are like my 2nd family. There is such an ongoing welcome feeling here that even members who don't or no longer own the MM can feel.
Regulate Racing
Can you post the specs on the cams?
MM.net Village Idiot
Coil interest here too.
Sent from my DROID RAZR using Tapatalk 2
03 Black MM: Trilogy #19, Build Date 04/02/03 #7113
03 SB MM: Lidio Tune/JLT CAI DD Build Date 04/02/03 #7114
junior member
82,000 milesOriginally Posted by RoyLPita
MM.net Village Idiot
I'm out.
Sent from my DROID RAZR using Tapatalk 2
03 Black MM: Trilogy #19, Build Date 04/02/03 #7113
03 SB MM: Lidio Tune/JLT CAI DD Build Date 04/02/03 #7114
junior member
Cams were put in 8 years ago,don't know specs. Car ran 11.3 with this setup L.Y.
Regulate Racing
I want to know the setup you were running, psi, CR, rhwp, rpm shift, gear and trap speed?
Last edited by LANDY; 07-29-2012 at 05:04 PM.
COBRA In Process
Valve cover intrest??
junior member
Used them on new engine.
junior member
D-1 Procharger with 12# boost
CR 9/1 on stroker engine
HP 525
shift at 6800 with manual valve body trans
gears 4:56
1.64 60ft,11.3@118.85
Senior Member
RC Fuel Injection calibration sheet for the 60lbrs:
http://www.rceng.com/
Pro-M Mass Air Flow sensor and housing:
One of the pair of heads with Stage 2 blower cams (Intake: 222deg @ .050/.475" lift Exhaust: 222deg @ .050/.475" lift). These also have the stronger springs for the higher lift.
COPs (Coil On Plug):
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Senior Member
Bump! Good parts for a high HP engine build here!I'd get those injectors myself, but, my budget has been neutered!
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
