Junior Member
I have a probelm in my whipple supercharger belt
I have belt slip
I install whipple supercharger into Mercury Marauder 2003
We also had some belt slip
we need part that come with Pulley same that you install into tiyr car CWright
I need help stop the belt slip right now
2.9 Whipple
Mos speed shop fabbed that up for me. I'm sure they could make one to send you. Shoot a pm to Martyo and he can check to see how much it'd cost. They can prob draw a diagram of how it's installed as well.
Sick-Speed play toy
Thats looks sweet Chris! For some reason I thought you had the dual pulley Thump?
ImageUploadedByTapatalk1352059197.680994.jpg
PM-1002-90-3001 Billet Aluminum Belt Tensioner with 76mm Aluminum Billet Idler Pulley & S197 Saleen Extension Arm
Patent # US D596,824 S
Fits all Ford models with a smooth tensioner pulley & fitted with Saleen supercharger - see Ford models here
Our heavy duty belt tensioner comes with a 76mm Aluminum Billet Idler Pulley & S197 Saleen Gripper Plate complete with double bearing billet aluminum Idler pulley. The Gripper plate must be used in conjunction with the Thump RRR Racing Billet Tensioner P/N PM-1002-76 or PM-1002-90. This may be used on either 6 or 8 rib setups. It comes with a 76mm billet aluminum idler pulley.
Available in silver only. Read customer reviews
$555.00
http://www.thumpracing.com/index.htm#belt_tensioners
Sent from my iPhone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
hotford
I'm gonna get one.....................
- 82 GT coyote swap started
- 03 300a Marauder, stroked,cammed,T/S Trilogy Supercharged # 216,Best Et 10.77@129.72 on slicks, 93 pump gas. driven to the track.
- 2011 GT 500, 3.4 whipple,93 pump gas,10.47@133,Driven to the track.
- 2003 azura blue Mach 1, cobra motor,2.9 Whipple,crusher inlet,built 4r70w trans,04 IRS rear.full weight street car, Corn Fed
Mr. Hankey
Put a bigger pulley on the idler arm. That will squeeze the belt around the blower pulley more.
Or you can run a bigger blower pulley and then get a bigger crank pulley to up the boost.
~Chris
Willing to meet up half way
^^^^^^This, got rid of my belt slip.Originally Posted by justbob
More current shot of said tensioner.......
Last edited by Spectragod; 11-04-2012 at 05:43 PM.
I LOVE Jerry's bar, it's my kinda place...........
When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.
"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "
Trilogy # 192 / T.S. 0012
BOOST GETS YOU FELONY STOPPED!!!
2.9 Whipple
Thanks Bob! Brandon designed this new setup for me. I like it and it did get rid of all the slip. Our main concern in doing this way was to minimize pressure on the snout of the S/C.
MO derator
As Chris said, we can make this set up for you and then ship it out to you. I will be honest, I do not have any experience shipping to your country so it will be hard for me to judge shipping charges on this.
Let me know if you are interested.
Junior Member
I need to buy it
Ok, I need to buy it as soon as possible
how much does it cost ?
how can I buy it?
can you send me website if you have it?
thanks
not many friends @200 MPH!!!
Send me the whipple with slip and I will send you an eaton that doesn't!!! Had to sorry!
MO derator
We would need Chris's car back at our shop to take the measurements.
2.9 Whipple
That's not a problem. I will be gone and can drop by after Thanksgiving.
Junior Member
I need a help
The Car is in Saudi Arabia, I think I can not ship it to USA
Can you tell help me?
thanks
Junior Member
I need to make sure
I need to know, do I need to ship the car or not?
2.9 Whipple
He can look at my car and get the measurements. Then ship the parts to you.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
