Hi,
looking for upgrading my tranny to handle 600+ HP
is there a package to use it for rebuild ???
i need a one web site to order all required parts ( to save time and money )
Thanks.
Hi,
looking for upgrading my tranny to handle 600+ HP
is there a package to use it for rebuild ???
i need a one web site to order all required parts ( to save time and money )
Thanks.
2003 (300B)
Build Date: 01/07/03
Delivered: 07/14/03 @
Crossroads Ford Lincoln Mercury
Frankfort, Kentucky
Adopted: 11/23/09 in Missouri
#6483 of 7838
Black/ Light Flint (1 of 115)
Original Stock
Pete...
2k04 BLACK Mercury Marauder 300A #810 of 3223
DOB 10/31/2003
DOP 1/2/2004
2k19 AGATE FORD Edge ST with Performance Brakes
DOB 12/11/2018
DOP 6/19/2019
Water Wetter, K&N AirCharger/Drycharger, SS Inserts,
SilverStar 9007SU, WeatherTech WeatherFlectors, Steering Wheel Badge,
AutoMeter Gauges (Oil Press, Voltmeter, and Trans Oil Temp),
ASC 840 VSS Sunroof, Kenwood KFC-C6879ie x4, COBRA Fender Badges,
Z&M Rear Control Arms, FORD GT Coil Covers,
Gorilla Lock Lugs all around, Decklid Designs Trunk Lid Liner,
SCT Xcalibrator2 (Innovative Interceptors) w/Lidio's (Alternative Automotive) Marauder 3.55 tuning,
4R75W by Fred Brown's Performance Transmission, tuned to match Lidio's tune,
DG Motorsports Carbon Fiber Radiator Cover, Zack's Badgeless Grille,
Accel 140034-8 Coil Packs, Granatelli Motorsports Coil-On-Plug wires
Even though I walk through the valley of the shadow of rice,
I will fear no turbo for displacement is with me.
You need to do a little reading over on clickclick. Here's a nice read: http://www.clickclickracing.com/tech%20mods1.pdf
600rwhp you will need a 300M hardened stub shaft, 4 Alto he (high energy reds or better) intermediate clutches, 4 reverse clutches, 5 to 6 Alto he forward clutches, 6, 7 or 8 Alto hp direct clutches, spriral ring instead of the snap ring (sonnax part #76554RK), updated accumulators if needed, can go with a lager diameter OD servo (2.7") since 4R's are sleeved, high carbon or Kevlar OD band and tailshaft lube mod.
https://www.wittrans.com/Schematic.a...5W/4R70E/4R75E
http://www.bulkpart.com/
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Run it untill she blows. Im still on the stock tranny. I ran over 50 passes at 646rwhp on the gun and currently at 545rwhp and still going.
Out of curiosity, how many miles on your 4R Landy? I have 150k on mine and it was used as a Springfield, MA uc before it went to auction, dealer, then me. It's time for mine now. I guess it depends on mileage, abuse/care, etc. You definitely wouldn't want soft shifts with that power on a high mileage one either.
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Sits at 62k. I do try to stay away from WOT downshifts and i dont roll race either.
There are currently 1 users browsing this thread. (0 members and 1 guests)