Junior Member
im rebulding my rear end since all the fluid is pouring out of the drivers axle my question is can u guys give me a link to purchase some quality bearings/ seals for the rear and also what axles im going 4.10 if matters ... btw i opened up the rear end fill plug and stuck my finger in there and it looks like the metal terminator dude so im expecting the worse and praying for the best
Senior Member
If you are going to get new gears, just order them, including a master rebuild kit from Sparta. They can get you a carbon clutch posi kit too. As for the axles, NAPA sells a kit, axle, bearing, seal for about $150. If there is that much metal in your fluid DON'T leave anything to chance, it will bite you. Change ALL of the bearings.
#2941 300A
4.10's, carbon clutches
Marty O Tune
Curless Cure
Widened Wheels
Dead Pedal
Eaton Swapped
Bar tender and maker of:
Christmas in a cup
The "Bucket of South Haven Iced Tea"
One Legged Lesbian Kickboxer
Cocka Two
Everything Marauder, LEDs & HI
And flush out the rear end housing really really good.Originally Posted by Curless
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Junior Member
what is the carbon posi deal , any improvement? wasnt really planning on rebuilding the posi too as money is kinda tight with a baby on the way wanted to just do 4.10s. and whatever else is manditory the guy i bought it from claimed ford rebuilt the rear about 6 months before i purchased it not even a year down the road axle seals are leaking i guess he was full of it. :-(
also anyone in south florda heard of 1 trick pony was planning on having them do the rear work
Senior Member
Cobra Mustang clutches for the posi, they are carbon fiber. As for gear change, you will need a tune as well.
#2941 300A
4.10's, carbon clutches
Marty O Tune
Curless Cure
Widened Wheels
Dead Pedal
Eaton Swapped
Bar tender and maker of:
Christmas in a cup
The "Bucket of South Haven Iced Tea"
One Legged Lesbian Kickboxer
Cocka Two
Sick-Speed play toy
At like $109 it will be a wise investment. You also need to inspect your spider gears while you have it apart. My fluid looked good considering what my spiders looked like. Picture no teeth.
Sent from my iPhone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Junior Member
ok thanks for the info guys very much appreciated now have any of you south florida guys heard if this one trick pony in miami?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote