Page 1 of 4 1234 LastLast
Results 1 to 15 of 54

Thread: EATC Illumination

  1. #1
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250

    EATC Illumination

    Working on an upgrade / repair of the lights for the EATC buttons.

    Will replace the incandescent bulbs with LEDs.

    I have test unit that I will be installing tomorrow.


    I now have replacement LEDs for the EATC unit. You will still need to send your EATC as there is some work involved.

    It worked great! See post #33 for a picture.

    This will not change the color of the EATC illumination... just make it brighter and longer lasting.

    The cost is $55.00 which includes new o-rings.
    Last edited by fastblackmerc; 04-10-2019 at 07:51 AM. Reason: $10.00 increase in cost due to increased postage and parts
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  2. #2
    Join Date
    Sep 2007
    Location
    Smoke Cloud
    Posts
    16,157
    I'm very interested!

    The KING of BLING!


    BOOST GETS YOU IMPERSONATED!

    Quote Originally Posted by GOT5.0 View Post
    Be forewarned dont run the one that says DOOM. cause thats just what youll get!
    Quote Originally Posted by TAKEDOWN View Post
    It's easy to find D00M, just follow his smoke or his trail of trophies!
    Quote Originally Posted by MMBLUE View Post
    When your good nobody likes ya, everyones jealous.

  3. #3
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Will be doing the final assembly / burn in tonight. Installation tomorrow with before and after pics.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  4. #4
    All of the illumination on my buttons went out the other year ago, the screen works fine.

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  5. #5
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by ctrlraven View Post
    All of the illumination on my buttons went out the other year ago, the screen works fine.
    This will fix the button illumination.

    I haven't seen the LCD panel burn out........ yet.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  6. #6
    Is this a fix where we have to send in the EATC to you or something you ship out and we can replace ourselves?

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  7. #7
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by ctrlraven View Post
    Is this a fix where we have to send in the EATC to you or something you ship out and we can replace ourselves?
    Will have to send it to me. Need to rework the power to the bulbs and install LEDs. Alot of soldering involved.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  8. #8
    Join Date
    Jul 2010
    Location
    Crook County
    Age
    36
    Posts
    340

    EATC Illumination

    I'm interested..


    Sent from my iPhone 5 using Tapatalk
    300A 8-20-02 #3849
    Webasto Aftermarket Moonroof
    Rear Spoiler
    S55 Tail Light Treatment
    5% Limo Tints
    Fresh Black Paint & PVD Chrome

    Stainless Works Headers & Full Cat Mandrel Exhaust System w/Magnaflow 11229 Mufflers, Martyo Tune & Coolant Mod, Steeda UDP, Stewart WP, JLT CAI & Catch Can, J-Mod, UHaul Pan, Rebuild 4R70W, Dynotech 4' 6061, Forced Lube Mod, 31 Ford Spline Axles, 31 Cobra Carrier w/CF Clutchs, Ford Racing 4.10, TA Girdle & Stud Kit, Carfixer Alignment & SPC Camber Bolts, Ridetech HQ Front Coilovers w/ADTR extended bracket & ADTR Rear HQ Shocks, Arnott P2936 A/C & A-2220 Bags, Gorilla Lock, Cooper Zeon RS3-G1 Tires, Metco Control Arms & Watts Link, Addco F/R Sway Bars, SS Brake Lines, AutoMeter Digital Oil & Volt Gauge, Full VLED Interior/Exterior, Alpine ILX-507, PKG-M780 Headrest Monitors, MRP-F300, R-S65C.2 & R-S68 Speakers, HCE-C1100 & KTX-C10LP Camera System, Viper DS4 & DSM550 GPS SmartStart System, Yellow Optima, BIG III & 200 Amps Alt

  9. #9
    Join Date
    Sep 2010
    Location
    maryland
    Age
    34
    Posts
    84
    Is it possible to change the color once youve successfully completed this one?

  10. #10
    Join Date
    Jul 2008
    Location
    North Georgia
    Posts
    3,990
    Count me in Jim.

  11. #11
    Join Date
    Mar 2003
    Location
    Las Vegas, NV (Henderson)
    Posts
    877
    Got one that just lost a bulb, so I'm interested too!
    His: Blue w/Light Flint Born 02/05/03 (Wednesday)
    6674 of 7838, Color sequence 102 of 327

    1 of 111 Without Heated Seats
    6 CD Changer in Trunk
    Locking Lugs
    Trunk Organizer
    Real Oil Press Guage w/MM Face
    Marauder Side Emblems
    Rear Bumper Inserts

    Nephews: Blue w/Light Flint
    Born 02/05/03
    6673 of 7838, 101 of 327 Blues 1 of 111 Without Heated Seats
    Cars purchased 7 years apart, but are only 20 VIN numbers apart. Sequential units on the assembly line.


    Hers: Black 300A w/Charcoal Born 06/25/02 (Tuesday)
    2011 of 7838
    .
    Locking Lugs
    Trunk Organizer
    Real Oil Press Guage w/MM Face
    Factory Alarm
    Marauder Side Emblems
    Rear Bumper Inserts

    #4 (Pound Rescue Marauder) 2003 DBP/Light Flint
    120 of 328 DBP 1 of 217 with heated seats.
    6705 of 7838 2003's
    Built Friday 02-07-2003
    Bought 09-10-2012

    #5 2003 DBP/Light Flint
    136 of 327 Blues 1 of 111 W/O Heated Seats
    6741 of 7838 2003's
    Built Tuesday 02-11-2003
    Bought 05-06-14

  12. #12
    Quote Originally Posted by vegasmarauder View Post
    Got one that just lost a bulb, so I'm interested too!
    Must be nice lol, all of mine went at the same time.

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  13. #13
    Join Date
    Feb 2003
    Location
    Purgatory, FL
    Age
    53
    Posts
    10,164
    I have a unit that could use this fix.
    (#6178 in black per FPIC)
    Call 1-800-FORD-788 and press "1". Have the last 6 of your VIN handy. You will get the numbers for FREE. You'll pay $$$ for the certificate.

    MM traded in 8/9/13 @ 128909 miles. It was fun for almost 8 years. I met airmercpun on 1/17/14. He was the new owner of my former ride. -Now gone.

    Update: back in the game with a late build 03 GMGS with some MM add ons like Escape audiophile radio w/Sirius sat radio, rear sway bar, catback exhaust, and header panel.

    Rest In Peace:
    Alex "Marauderboi" Vachon 3/2/92-8/13/10
    Paula Babineau 1/9/67-8/2/11
    Rex Weinbender
    Peter


    See my garage file for part numbers and whatnot.

    IMHO, this site- the members that I chat with- and the ones that I now Hang with- are like my 2nd family. There is such an ongoing welcome feeling here that even members who don't or no longer own the MM can feel.

  14. #14
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by marauder'10 View Post
    Is it possible to change the color once youve successfully completed this one?
    Changing the colors is tough to do since Ford uses white lights that shine through a green filter / coating. Removing that filter / coating isn't cost effective and rarely works right. If it was an easy fix I'd be more than happy to do it.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  15. #15
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Well pictures didn't come out.

    Here is what I will offer.

    If you just need the lights replaced with LEDs the cost will be $55.00 including shipping.

    I will replace the o-rings for FREE!
    Last edited by fastblackmerc; 04-10-2019 at 07:53 AM. Reason: Price increase
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




Page 1 of 4 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Window switch illumination
    By Blk04MM in forum Shop Talk
    Replies: 5
    Last Post: 12-04-2015, 02:26 PM
  2. Gauge illumination
    By prg333 in forum Shop Talk
    Replies: 3
    Last Post: 08-02-2011, 06:53 AM
  3. Interior Illumination
    By montazch in forum Shop Talk
    Replies: 16
    Last Post: 12-01-2010, 10:20 AM
  4. Power seat illumination
    By gnxtc2 in forum Community Discussion
    Replies: 4
    Last Post: 12-02-2007, 03:22 PM
  5. Illumination question!!!
    By 2003godshead in forum Shop Talk
    Replies: 12
    Last Post: 09-17-2006, 06:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •