Results 1 to 15 of 15

Thread: Repaired BCMs

  1. #1
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    64
    Posts
    25,842

    Repaired BCMs

    If your blower motor isn't working or runs at one speed and tapping the BCM fixes the problem you need a BCM.

    I can now offer repaired BCM's, Blower Control Module

    These units are repaired and tested. Guaranteed to not fail again.

    As you know even a new BCM will eventually fail, just like the LCM's and EATC's.

    The cost is $25.00 (shipping included)

    The only thing I ask is that you send your old BCM back so I can repair it and get it to someone else.
    Last edited by fastblackmerc; 03-19-2013 at 06:14 AM.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  2. #2
    Join Date
    Feb 2011
    Location
    Asheville, NC
    Age
    48
    Posts
    2,724
    ^^^+1^^^

    Mine quit working December last year; got a FBM-repaired BCM and it's been working like a champ since then.

    Just one question, Jim; what am I supposed to do with the radioactive waste?
    In Memoriam....11-14-13

    Rex Weinbender

    The best friend a person could have


    In Memoriam...05-26-14
    Lillian Kostac

    I love you grandma!!!


  3. #3
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    64
    Posts
    25,842
    Quote Originally Posted by IwantmyMMnow! View Post
    ^^^+1^^^

    Mine quit working December last year; got a FBM-repaired BCM and it's been working like a champ since then.

    Just one question, Jim; what am I supposed to do with the radioactive waste?
    Dump it anywhere.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  4. #4
    Join Date
    Jun 2006
    Location
    Central New Jersey
    Posts
    579
    Hmm...
    2004 Silver Birch
    Build Date 3/19/04
    Adopted on 10/19/07
    Seq#2102 of 3214
    #681 of 997 SBs
    #154 of 336 SBs with the moonroof
    Thanks Brian
    Member of The 100K Club 11/20/11
    Options-
    moonroof-heated seats-6-disc changer-trunk organizer-rear spoiler-mercury all weather mats
    Mods-Extras-Bling-
    Action Automotive-SS Inserts
    Badgeless Grille(Thanks 03 Merc)
    Big Mike's Performance-"Sto n Sho" License Plate Holder
    Dead Pedal(Thanks lji372)
    Curless's Pedal Gear
    Cruzer's-Arm Rest
    EATC Ungrade(Thanks JACook)
    Escape/Audiophile Radio Upgrade(Thanks shodude)
    Ford Racing M-7195-AOD Aluminum Trans Pan
    Innovative Interceptors-God's Head Valve Stem Covers
    J-Mod Valve Body
    K&N Performance Intake Kit{CAI}
    LCM Upgrade(Thanks Fastblackmerc)
    Marty-O Fender Badges, Tune & 4:10s
    Pro-gard Skid Plate
    Visteon Sirius Satellite Radio Setup(Thanks RoyLita)
    Weather Tech-Side Window Deflectors

  5. #5
    Join Date
    Jun 2012
    Location
    ON canada
    Posts
    262
    Hi Jim. I was wondering if I could change all the backlite dash gages from green to red? I have a radio that i can change the colour infinatly and all though green looks ok the red pops and would really look good if all the bulbs were red. I guess I can't do anything about the clock? It being a 03 it has the clocks in the dash. Thanks. Jeff.
    You Can't Have It All.
    Where Would You Put It?

  6. #6
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    64
    Posts
    25,842
    Quote Originally Posted by jb513 View Post
    Hi Jim. I was wondering if I could change all the backlite dash gages from green to red? I have a radio that i can change the colour infinatly and all though green looks ok the red pops and would really look good if all the bulbs were red. I guess I can't do anything about the clock? It being a 03 it has the clocks in the dash. Thanks. Jeff.
    They can be changed but it's alot of tedious work..... not as simple as changing bulbs. Gauges have to come apart, the green film has to be removed and then everything has to be reassembled.

    I can do it but the labor cost would be very very high.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  7. #7
    Join Date
    Jun 2012
    Location
    ON canada
    Posts
    262
    Quote Originally Posted by fastblackmerc View Post
    They can be changed but it's alot of tedious work..... not as simple as changing bulbs. Gauges have to come apart, the green film has to be removed and then everything has to be reassembled.

    I can do it but the labor cost would be very very high.
    Thanks for this Jim. I didn't realize there was film involved, thought it was just bulbs. Oh well, I'll add it to the list when I win the lottery!!
    You Can't Have It All.
    Where Would You Put It?

  8. #8
    Join Date
    May 2007
    Location
    Midwest Coast
    Posts
    678
    I'm next in line in the BCM pool. Sent you a PM, Jim.
    03 300A Black 1719/7839
    Current mods: FRP 4.10s, DR 93 Octane & shift tune, 8-clutch stock diff rebuild, bald tires
    Wish list: Eaton M112 kit and/or get bored and stroke it to a 5.0L

    Don't let friends drive stockers:

  9. #9
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    64
    Posts
    25,842

    I need your old BCM

    As you may know I repair failed BCMs and send them to members for a slight fee. I ask that the old BCM be sent back so I can continue the cycle.

    I don't have any in stock since I haven't gotten any returned.

    If you have old BCM(s) I'll pay the shipping if you send them to me.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  10. #10
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    64
    Posts
    25,842
    I have four repaired BCM's ready for shipment.

    $25.00 shipped, all I ask is that you return your old one so can repair it and offer it to another member.
    Last edited by fastblackmerc; 07-14-2015 at 09:20 AM.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  11. #11
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    64
    Posts
    25,842
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  12. #12
    Join Date
    Apr 2011
    Location
    Wheeling, WV
    Age
    37
    Posts
    1,308
    Still available? I would like one but it will be a few weeks before I can get the old one out and sent back to you.
    2003 Mercury Marauder 300A---Black of Course!


    Mo's 93 Octane Tune for 3.55's(Thanks Marty!), K&N Intake with Prefilter, Steeda Pulleys(Thanks DRobin), Intake Spacer, Stewart/EMP water pump, Powdercoated Cam Covers and Coil Covers and COT, Granatelli Connectors, A few billet goodies, FRPP Ceramic Coated Shortys with X-pipe and High flow cats(Thanks DRobin again!), Magnaflow's and 4" Tips no resonator, Addco rear Sway Bar, Moog front end links, Oil Catch Can, 200 amp alternator with Big 3 Upgrade, Napa Performance rotors front and rear and EBC Greenstuff pads, SS braided brake hoses and red calipers, HID's 5K head and 3K fog, 20% Tint all around, Bob White Red Inserts, Web Electric Sequential Turn Signals, Anti-theft Trunk Plates, Trunk Lid Liner, Tinted Tails, Marauder Valve Stem Caps, Chin Spoiler and Aftermarket Girdle Cover

  13. #13
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    64
    Posts
    25,842
    Quote Originally Posted by Baconbit View Post
    Still available? I would like one but it will be a few weeks before I can get the old one out and sent back to you.
    Yes, PM me.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  14. #14
    Join Date
    Feb 2015
    Location
    South Florida
    Posts
    1,115
    Thanks for the heads up Fastblackmerc

  15. #15
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    64
    Posts
    25,842

    Taking donations

    Does anyone have any old BCM's they need to get rid of?
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. LCM I repaired
    By fastblackmerc in forum Marauder Innovations
    Replies: 37
    Last Post: 03-28-2012, 01:07 PM
  2. Repaired EATC
    By sailsmen in forum Marauder Innovations
    Replies: 1
    Last Post: 09-15-2011, 11:59 AM
  3. Rear axle repaired
    By Blancosmarauder in forum Shop Talk
    Replies: 10
    Last Post: 11-23-2010, 08:49 AM
  4. Need your NAZMAN Intake repaired?
    By Zack in forum Shop Talk
    Replies: 23
    Last Post: 03-09-2010, 01:10 PM
  5. Collector gaskets Repaired
    By CRUZTAKER in forum Kook's Custom Headers
    Replies: 3
    Last Post: 04-06-2004, 05:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •