Replacing stock sound system and adding LED lights

[fastblackmerc]

When doing that mod you have to add a white filter to the back of the gauges! Ask me how I know.

How do you know????

[ctrlraven]

When doing that mod you have to add a white filter to the back of the gauges! Ask me how I know.

How do you know????

You can add a white filter if you want (as such http://www.amainhobbies.com/product_...FRDxOgodHmEASw) OR just remove all the green, use a 5K or 6K SMD led bulb while the clear frosted plastic on the gauge face to produce your white.

I did add 3M white reflective tape inside the gauge cluster to help directly the light around to certain areas.

[Invader]

How do you know????

I'm in the middle of that mod right now. You need something to catch the light and move it evenly across the gauge. I used a stage and lighting filter. Works Awesome!

[Invader]

I'm in the middle of that mod right now. You need something to catch the light and move it evenly across the gauge. I used a stage and lighting filter. Works Awesome!

And then paint the inside of the mask white with a plastic paint.

[Invader]

My mod is a little different though. I'm matching the main cluster to the Phantom II gauges I've installed in the stock pod. I'm still not a 100% done yet but when I started this mod I only had Ed's YouTube video to go by. So needless to say I had to do this twice. Best of luck!

[Invader]

Oh, here is what my main gauge faces will look like!