Results 1 to 13 of 13

Thread: What Santa forgot to put in his sleigh!!!

  1. #1

    What Santa forgot to put in his sleigh!!!

    Are you listening "Marauder Team"??!!

    1) Mercury godhead badges for both front AND rear

    2) Mercury godhead medallion for my steering wheel (like the pic I saw of the S55 @ SEMA)

    3) Windsheild wiper arms that hinge so I don't chip the paint on my hood

    4) A Supercharger Kit that my Master Tech at my BlueOval Ford Dealer can put on and Warranty

    5) Mercury godhead (embossed) mudflaps to keep my Zaino'd sides clear from these wide tires

    Oh well...my birthday is only 6 months away...

    Anybody want to add to he list?

  2. #2
    Join Date
    Nov 2002
    Location
    Off-Shore America
    Posts
    10,219
    The jacket is nice, I like mine a lot. But, a 1/24 scale Danbury Mint diecast would be a nice option for those in warmer climates who probably won't wear the jacket. Easier on the LM marketing budget, and one size fits all.

  3. #3
    Billatpro Guest
    "But, a 1/24 scale Danbury Mint diecast would be a nice option"

    Well SergntMac, I just might be able to help with this one! Not from LM for free but at a nominal cost, this is the kind of thing I do for a living and have already put this in motion with a few of my vendors, I want one myself! what would you think of a 1/18th scale?

  4. #4
    Join Date
    Nov 2002
    Location
    Off-Shore America
    Posts
    10,219
    Bill..write me at "sergntmac@aol.com" and tell me where to send the check.

    I see that you "dumped" an Excursion for an MM. I wanted one of those real bad, but just couldn't swing it financially at that time because I was already 1/2 way through my 3rd Mountaineer. Now, I'm very happy I could not do something when I wanted to.

  5. #5
    Join Date
    Dec 2002
    Location
    NewBrockton AL.
    Age
    74
    Posts
    955
    Bill, I too would like one of the diecast. You can get me at bjm03mm@entercomp.com.
    Thanks Bob
    03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
    Metco D/S Loop,Boxed Lower Rear Control Arms
    New Made Upper Rear Control Arms
    Boxed Watts Link,Ford Finned Rear End Cover
    Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
    Daniels Coil Covers and Buttons,Nitto 255/45 front
    Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.

  6. #6
    Join Date
    Nov 2002
    Location
    Las Vegas, NV
    Age
    76
    Posts
    432
    Bill,

    Put me down for one.
    2003 Marauder 1907 of 7838
    Built 06/24/02 Bought 10/25/02 Sold 1/5/19
    Reinhart chip,stat,plugs
    McGard locks
    Mercury logo valve/plate bolt caps
    Bob White black reflective letters
    Pioneer AVH-X2500BT
    Kicker 10" sub and 250 watt amp
    Gods Head spinners by Jerry

  7. #7
    Join Date
    Nov 2002
    Location
    Waukesha, WI
    Age
    63
    Posts
    197
    Bill

    I want two.

    Z

  8. #8
    Join Date
    Sep 2002
    Location
    St. Louis, MO
    Age
    39
    Posts
    2,724
    Bill,

    Where do I sign?

    As for what's missing... where's my 5-speed tranny?

  9. #9
    Join Date
    Nov 2002
    Location
    Chicago
    Posts
    1,385
    slowpoke will take one as well...

  10. #10
    Billatpro Guest
    OK OK, It's a little to soon to start taking anyones money just yet. I might be treading on thin ice here due to the no selling rules but I will take a chance and lay this out for you. Please understand that this project hinges on tooling availability and making the required changes to it to make it a Marauder. If the tooling is available it will take at least 16 to 20 weeks from art approvals to get product. If the tooling does not exsist then it is a matter of how many can made and sold to justfy the cost of the tooling. Two of the 9 manufactures have already replied "No Tooling" but the best ones have yet to answer. I'm thinking of adding (if the project is a go) a Jacket! and no you won't be able to wear it. Will post progress as I go.

  11. #11
    Join Date
    Nov 2002
    Location
    Off-Shore America
    Posts
    10,219
    This is great, thanks Bill.

  12. #12
    Billatpro Guest
    Guy's please take a look at the new thread "Marauder Die Cast cars"

  13. #13
    Join Date
    Sep 2002
    Location
    New York
    Age
    61
    Posts
    344
    I'm in too
    JohnnyB

    2004 Mach 1 - Torch Red 5 Speed

    2003 Mercury Marauder
    300A, RPC Chip, 4.10's, K&N Aircharger

    2002 Ford Focus ZX5

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •