Page 1 of 2 12 LastLast
Results 1 to 15 of 30

Thread: J-MODed Valve body on Ebay !

  1. #1
    Join Date
    May 2013
    Location
    Saudi Arabia
    Age
    34
    Posts
    403

    Smile J-MODed Valve body on Ebay !

    Hello guys,

    What do you guys think of this Valve body ? it has a J-mod done to it.
    I want to buy it to install it in my 2003 MM because in my area there's no one can do this mod as I know.

    So I need your advise guys should I buy it or not

    Thank you.
    EATON SWAP ONGOING LIST !!!!!!!!!

    Eaton M112 Supercharger
    Intercooler
    Lower intake plenum
    Coolant Intake Manifold
    TB Intake Plenum
    Throttle Body
    Cobra air intake tube
    Accelerator cable bracket
    Fuel rails
    39lb. injectors
    Cobra heat exchanger
    lower Metco pulley with hub
    Intercooler reservoir
    90mm Lightning MAF
    MAF to filter adapter plate
    Conical air filter
    Custom Bracket for Intercooler Reservoir
    Custom Gortch Brackets
    Heat Exchanger brackets
    Intercooler pump
    Intercooler pump wiring pigtail
    Intercooler pump bracket
    Ribbed idler pulley
    Belt tensioner
    Alternator Pulley
    Fuel Pump
    EGR delete kit
    New accessory belt
    Cooling tube
    IAT sensor

  2. #2
    Join Date
    Oct 2010
    Location
    Michigan
    Posts
    1,911
    I wouldn't trust it. I would highly recommend doing the JMOD yourself. If I can do it, you certainly can!
    2004 Black Marauder: #2237 Born on 4/1/2004

    Eaton Swapped and a bunch of other goodies!

  3. #3
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    It requires a drill, a drill bit, and 3rd grade equivalent reading skills to do a Jmod.. If you can remove a valve body, you've already done half the job!


    Builder Of Badassery
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  4. #4
    Join Date
    Dec 2014
    Location
    Saint Clair Shores, Michigan
    Age
    25
    Posts
    744
    I wouldn't buy a used valve body to begin with.

    2005 Mercury S55
    Saleen Supercharged 2V

  5. #5
    Join Date
    May 2013
    Location
    Saudi Arabia
    Age
    34
    Posts
    403
    Thanks for your supporting replay guys.
    But I watched the official J-mod video and hell no I cant do that !!!
    I don't know how you guys doing it without putting the gear DOWN.
    It's really hard for me to do it

    I guess it's a bad idea to buy a used one huh !!
    EATON SWAP ONGOING LIST !!!!!!!!!

    Eaton M112 Supercharger
    Intercooler
    Lower intake plenum
    Coolant Intake Manifold
    TB Intake Plenum
    Throttle Body
    Cobra air intake tube
    Accelerator cable bracket
    Fuel rails
    39lb. injectors
    Cobra heat exchanger
    lower Metco pulley with hub
    Intercooler reservoir
    90mm Lightning MAF
    MAF to filter adapter plate
    Conical air filter
    Custom Bracket for Intercooler Reservoir
    Custom Gortch Brackets
    Heat Exchanger brackets
    Intercooler pump
    Intercooler pump wiring pigtail
    Intercooler pump bracket
    Ribbed idler pulley
    Belt tensioner
    Alternator Pulley
    Fuel Pump
    EGR delete kit
    New accessory belt
    Cooling tube
    IAT sensor

  6. #6
    Join Date
    Feb 2009
    Location
    Upstate NY
    Posts
    4,373
    Quote Originally Posted by BeeDamn View Post
    Thanks for your supporting replay guys.
    But I watched the official J-mod video and hell no I cant do that !!!
    I don't know how you guys doing it without putting the gear DOWN.
    It's really hard for me to do it

    I guess it's a bad idea to buy a used one huh !!
    Yes, don't buy used.

    Just print out the jmod instructions, bring to a transmission shop that knows how to rebuild a Ford 4R70W.

    Buy an aftermarket tans pan with a drain plug too and bring it with you.
    Can't imagine them charging more than 100 to do it.
    2021 F150 XLT Super Crew short bed - no chrome! - 3.5 Ecoboost 400hp/500tq - 36 Gal tank (600 miles) - 4x4 FX4 Offroad + Max Tow - 3.55 Locker - 10 Speed - Pro Power 2kva - 24mpg @ 80 Ford is still the best.
    03 300A - Number 1727
    - Super Touring - 10k in the best upgrades - 13.8@99 N/A - SOLD
    - STAP was so much fun, loved meeting you all and racing.



  7. #7
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    I can get you a separator plate and gaskets, modify it and send it to you. You'll need someone local to install it and do the rest of the j-mod.
    Last edited by fastblackmerc; 03-02-2015 at 07:11 AM.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  8. #8
    Join Date
    Sep 2002
    Location
    Cape Cod, MA
    Posts
    13,676
    I wouldn't trust an unknown eBay piece, but fastblackmerc I would trust all day long.
    The Blackbird
    Trilogy #61
    Driveway Queen

    The Spruce Goose
    2004 Grand Marquis LS Limited Edition
    Daily Driver

  9. #9
    Join Date
    Sep 2006
    Location
    Clermont Florida
    Posts
    3,070
    Quote Originally Posted by babbage View Post
    Yes, don't buy used.

    Just print out the jmod instructions, bring to a transmission shop that knows how to rebuild a Ford 4R70W.

    Buy an aftermarket tans pan with a drain plug too and bring it with you.
    Can't imagine them charging more than 100 to do it.
    He's in the Kingdom of Saudi Arabia. Prolly not a great selection of Ford 4R70W tranny shop specialist.

  10. #10
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by MMBLUE View Post
    He's in the Kingdom of Saudi Arabia. Prolly not a great selection of Ford 4R70W tranny shop specialist.
    True but there are alot of "panther platform" vehicles in K.S.A.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  11. #11
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    He also has a po box in Delaware to send stuff to, so no worries of overseas shipping and customs.
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  12. #12
    Join Date
    May 2013
    Location
    Saudi Arabia
    Age
    34
    Posts
    403
    Thanks everyone for the effort.
    So if I got a j-mod plates what else remaining to do the job ?
    The drilling is easy I guess but the rest of the job is difficult to do my self
    I'll try to find a good trans mechanic and ask him if he can.
    IIRC no need to drop the trans right ? just the valve body correct me if i'm wrong.

    Thank you
    EATON SWAP ONGOING LIST !!!!!!!!!

    Eaton M112 Supercharger
    Intercooler
    Lower intake plenum
    Coolant Intake Manifold
    TB Intake Plenum
    Throttle Body
    Cobra air intake tube
    Accelerator cable bracket
    Fuel rails
    39lb. injectors
    Cobra heat exchanger
    lower Metco pulley with hub
    Intercooler reservoir
    90mm Lightning MAF
    MAF to filter adapter plate
    Conical air filter
    Custom Bracket for Intercooler Reservoir
    Custom Gortch Brackets
    Heat Exchanger brackets
    Intercooler pump
    Intercooler pump wiring pigtail
    Intercooler pump bracket
    Ribbed idler pulley
    Belt tensioner
    Alternator Pulley
    Fuel Pump
    EGR delete kit
    New accessory belt
    Cooling tube
    IAT sensor

  13. #13
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by BeeDamn View Post
    Thanks everyone for the effort.
    So if I got a j-mod plates what else remaining to do the job ?
    The drilling is easy I guess but the rest of the job is difficult to do my self
    I'll try to find a good trans mechanic and ask him if he can.
    IIRC no need to drop the trans right ? just the valve body correct me if i'm wrong.

    Thank you
    Did you watch the video?
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  14. #14
    Join Date
    May 2013
    Location
    Saudi Arabia
    Age
    34
    Posts
    403
    I watch it maybe ten times also I download it in my workplace to watch it in break time, but I don't know why it's too much for me to do it. The video explanation is so good and clear but I guess I need to practically see it better than watching it!
    EATON SWAP ONGOING LIST !!!!!!!!!

    Eaton M112 Supercharger
    Intercooler
    Lower intake plenum
    Coolant Intake Manifold
    TB Intake Plenum
    Throttle Body
    Cobra air intake tube
    Accelerator cable bracket
    Fuel rails
    39lb. injectors
    Cobra heat exchanger
    lower Metco pulley with hub
    Intercooler reservoir
    90mm Lightning MAF
    MAF to filter adapter plate
    Conical air filter
    Custom Bracket for Intercooler Reservoir
    Custom Gortch Brackets
    Heat Exchanger brackets
    Intercooler pump
    Intercooler pump wiring pigtail
    Intercooler pump bracket
    Ribbed idler pulley
    Belt tensioner
    Alternator Pulley
    Fuel Pump
    EGR delete kit
    New accessory belt
    Cooling tube
    IAT sensor

  15. #15
    Join Date
    Nov 2002
    Location
    Off-Shore America
    Posts
    10,219
    I am sure the KSA has a tranny dude around. From YouTube;

    http://www.youtube.com/watch?v=gbIAK...e_gdata_player

    Personally, I dislike this video. Volume is inadequate, and he begins by thanking two people. Just two.

    What about some thanks to Jerry Wroblewski?

    Anyway, hope this helps, good luck!

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Manual Valve Body
    By JBFTech in forum Transmissions
    Replies: 2
    Last Post: 03-07-2013, 03:16 PM
  2. BC valve body question
    By stryker in forum BC Automotive
    Replies: 2
    Last Post: 04-12-2011, 10:34 AM
  3. J moded valve body kit's
    By WPG_Merc in forum BC Automotive
    Replies: 20
    Last Post: 04-03-2010, 11:23 AM
  4. Which shift kit/valve body to buy???
    By USMCmarauder in forum Transmissions
    Replies: 19
    Last Post: 04-02-2007, 10:25 AM
  5. Mach 1 Valve Body?
    By Marauder.45 in forum Transmissions
    Replies: 13
    Last Post: 05-04-2006, 10:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •