How 'bout a TWSS!...?Originally Posted by CBT
Sent from my Pixel 2 XL using Tapatalk
STILL N/A
How 'bout a TWSS!...?
Sent from my Pixel 2 XL using Tapatalk
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
Sick-Speed play toy
I bit my tongue. I wouldn’t be able to stop... Where’s Joe? He should have a better answer on sticky things.
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Senior Member
No doubt, he would have a totally inappropriate picture of both "burping your system" and "sticky".
~But, it makes it a lot easier when he is manscaped.~ Haggis
~Cool, I can have one of those strangulation orgasms without the strangle.
WIN WIN!~ Zack
~Who needs to stop? I just wanna gooooooooooo~ -Matt-
Member
Thank you.. I tried it yesterday and so far so good.. the heater is heating and the Marauder looks like is not overheating. I just need to do the last step and hope is all good.
Thanks again,
J
Sent from my GM1917 using Tapatalk
Member
So I did this a couple days ago, in addition to replacing my water pump and thermostat, and I ended up draining about a gallon and a half and putting in 2.25 gallons. I guess whoever had my car before me didn't bother with this, and that's probably why my temp gauge would occasionally rise a bit, which is why I replaced the pump an thermostat in the first place!
Member
I had a lower radiator hose that was leaking and this thread really helped me out, I basically had the front end up quite a bit. I rolled the car off the lift and had the front tires on the ramp going onto the lift. It was a success, a few hours later I added about 8 ounces of coolant, and then a few days later about 4 ounces of coolant. I checked it a week later and I have not had to add any coolant.
Junior Member
I’m in need of help removing the cross over plug. Seems to be seized up!
Sent from my iPhone using Tapatalk
Weißbirke Plünderer
Heat, will need new o ring.
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Sick-Speed play toy
Or if you haven’t rounded it out yet it’s surprising just how handy a Milwaukee 1/4” impact is at knocking a little corrosion loose.
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Senior Member
Channel Locks worked everytime for Me.
Sent from my iPhone using Tapatalk Pro
Everything Marauder, LEDs & HI
I can get you a stainless steel replacement with a hex head.
PM me.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Member
I did this procedure and I was only able to get about 1 and 1/2 gallons in. When I drained it I probably got about 3 and 1/2 gallons out. Did I do something wrong?
Senior Member
I always let the car sit over night and refill from the cross over tube till full.
Sent from my iPhone using Tapatalk Pro
STILL N/A
It also helps if you have the front of the car lifted.....front wheels on ramps, up on jackstands or in my case, an inclined driveway.
That helps to purge all the air out of the COT fill pipe.
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
I'm Your Huckleberry
Squeeze all the hoses too
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
