I took the blower off for some maintenance, anyone know which belt is required. I see no markings left on this one.
Thank you!
I took the blower off for some maintenance, anyone know which belt is required. I see no markings left on this one.
Thank you!
1987 GN running 10's. 2003 MM Blue Sold and dearly missed!
2003 Black 300B
Procharger P1sc with air to air intercooler
3,000 PI converter
4.10 Eaton posi 31 spline carrier
Moser 31 spline axles
Koos headers, with custom stainless exhaust, Megs tips
Carbon fiber drive shaft
Metco control arms
Every autometer procomp gauge in the catalogue
- 82 GT coyote swap started
- 03 300a Marauder, stroked,cammed,T/S Trilogy Supercharged # 216,Best Et 10.77@129.72 on slicks, 93 pump gas. driven to the track.
- 2011 GT 500, 3.4 whipple,93 pump gas,10.47@133,Driven to the track.
- 2003 azura blue Mach 1, cobra motor,2.9 Whipple,crusher inlet,built 4r70w trans,04 IRS rear.full weight street car, Corn Fed
Just measure the belt , and then get a Gates fleetrunner (Green back) belt they are the best you can buy.
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Looks like I'm measuring. Off to the parts place.
1987 GN running 10's. 2003 MM Blue Sold and dearly missed!
2003 Black 300B
Procharger P1sc with air to air intercooler
3,000 PI converter
4.10 Eaton posi 31 spline carrier
Moser 31 spline axles
Koos headers, with custom stainless exhaust, Megs tips
Carbon fiber drive shaft
Metco control arms
Every autometer procomp gauge in the catalogue
I'll buy you three of your belts if you buy me just one for my ProCharger! Deal?
Builder Of Badassery
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Gates Green FTW! No belt slip even at 18psi.
LOL! I had to go to three stores which brought me to the bad part of town. I couldn't find the gates green any where. The belt on the car turned out to be an acdelco 6k 1080, the thing was looong. The guy at the counter was able to clean the belt with glass cleaner and we were barely able to make out the number but we got it, kicker this was the only one in stock in this whole city.
The car is back together and it sings now, I'll need drag radials.
Thanks fellas for all the help!
1987 GN running 10's. 2003 MM Blue Sold and dearly missed!
2003 Black 300B
Procharger P1sc with air to air intercooler
3,000 PI converter
4.10 Eaton posi 31 spline carrier
Moser 31 spline axles
Koos headers, with custom stainless exhaust, Megs tips
Carbon fiber drive shaft
Metco control arms
Every autometer procomp gauge in the catalogue
Im using goodyear
Sent from my iPhone using Tapatalk
Using the stock pulley the belt I use is:
Napa Micro-V 25
061080HD
Which is a fleet runner belt
Good to keep a spare in the trunk!
There are currently 1 users browsing this thread. (0 members and 1 guests)