Eaton Swap Parts List Thread

[Zack]

I've been slowly piecing together the parts that I need for this swap for a little while now, but it's crunch time. I know this is "the recipe" that everyone follows, but page 3 of this PDF http://www.fordracingparts.com/downl...I_TechTips.pdf from FoMoCo/FRPP has me questioning the use of 39 lb/hr injectors. Is that where the Boost-A-Pump and the 255lph pump come into play?

39# injectors are good to 480rwhp
Use an aeromotive 340 pump and you won't need the BAP