Proved how "Ghetto Fabulous" I could really be by jamming a bigger starting battery in my baby cuz my new stereo equipment told me to...
Curless will be so disappointed...but I will clean up the wires later when the stereo is installed.
IMG_0950.jpg
Proved how "Ghetto Fabulous" I could really be by jamming a bigger starting battery in my baby cuz my new stereo equipment told me to...
Curless will be so disappointed...but I will clean up the wires later when the stereo is installed.
IMG_0950.jpg
Last edited by Peace2Peep; 07-01-2020 at 04:53 PM.
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
I'm having trouble with my EATC. The blower will only work when the manual control is at high. Do I need a new resistor? Does anyone know that part number?
(I already installed the rebuilt EATC from FBM)
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
95 degrees and humid.....but pulled the 3:55's out and slapping the 4:10's in...... long list of stuff still to go.... but she is coming along great...
Unfortunately I had to wash it. First time since Louisville ‘18???
Got caught up in a freakin monsoon playing peekaboo and I can’t tolerate water spots..
Anyways, after receiving my new rotors and speed bleeders today I officially have all parts to do Zack and Jerry’s big brakes after three years or so of collecting parts LOL. Still need some caliper paint or perhaps a powder coating kit plus the will to want to wrench on it. I actually might get this done in the next year or so. Stay tuned!
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Well I decided I had way too many boxes of parts around here so I took her apart.
Fully rebuilt the rear calipers plus new hardware cause cheap.
Had rear rotors turned cause forgot to order.
New parking brake shoes and hardware
All new parking brake cables
New rear Raybestos pads
New front rotors
New front calipers
New front power stop pads
Zack and Jerry’s brake brackets
New Stainless hoses front and rear
Painted calipers and brackets silver
Painted hats black
Speed bleeders on the front, rears wrongly ordered..
New spark plugs
Cleaned the fuel filter canister
Drained the blow by tank
Oil change
New gorilla nuts and MartyO badges since I won both at a raffle years ago as it only seemed fitting.
There’s got to me more I’m forgetting. Hot AF and nap time, finish up tomorrow..
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Went to 3 car shows...got a lot of likes.
Sent from my iPhone using Tapatalk Pro
Made some end pieces for my new radiator/remote oil filter support. Bolt them on tomorrow and fill in the middle.
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Very nice Bob!!![]()
No Marauder
Got it out the paint shop.
Sent from my SM-G950U using Tapatalk
![]()
Build# 1979/3214
Year 2004
300B
Ext. DTR
Int. Dark Char
FINALLY BOOSTED!!!
Looks great cer0413!![]()
2004 Silver Birch Mercury Marauder w/ Factory SpoilerBorn: 05/13/2004Adopted: 10/23/2004Inherited: 04/23/2010
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
There are currently 9 users browsing this thread. (0 members and 9 guests)