Window Regulator

[crouse]

Anyone have instructions or a video on how to replace the front passenger window regulator?

I've got the door panel off, but nit sure how to remove the old window regulator.

Rock Auto has about 8 options for the front right. Any suggestions on a brand? Cardone or Dorman?

[mustangeddie]

Here you go http://youtube.com/watch?v=XZStHf23oh4, Personally I would be using a motorcraft regulator 6W7Z-5423209-AA pretty sure most of the cheap ones are Chinese garbage.

[crouse]

Thanks, I was just watching that exact same video. I'm really concerned about breaking the glass when punching out the two rivets that hold the glass.

[mustangeddie]

Thanks, I was just watching that exact same video. I'm really concerned about breaking the glass when punching out the two rivets that hold the glass.

I just did one today to remove a window for a member here. The rivets on the window from the one I took apart from an 03 MM door didn't need to be punched out just drilled but yours may be different.

[crouse]

I'll get one ordered and probably work on it later in the week.

[crouse]

I've got all of the rivets removed except the two that hold the glass in. Any suggestions? Should I use a small drill bit, maybe 1/8" and drill out the center of the rivet? Then a larger drill but, maybe 3/8" to drill out the rest? I really don't want to break the glass.