Results 1 to 12 of 12

Thread: EATC repair services

  1. #1
    Join Date
    Jun 2008
    Location
    Lompoc, Ca
    Age
    59
    Posts
    82

    EATC repair services

    Anyone have any experience with the EATC repair services out there? There are a number of them posting repair service on Ebay. I did the O-ring replacement but mine appears to have an electrical problem that I cant repair.
    Sounnder

  2. #2
    Join Date
    Jun 2008
    Location
    Waukesha, WI
    Posts
    1,604
    Pretty sure Fastblackmerc does it.
    You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference

    I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard

    2004 300A Procharger #0010 D1X
    2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)

  3. #3
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    69
    Posts
    26,279
    What kind of electrical problems?
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  4. #4
    Join Date
    Jun 2008
    Location
    Lompoc, Ca
    Age
    59
    Posts
    82
    I replaced the O-rings. Hooked it up and it was still blew only through the defrost. Its not turning on the compressor when AC is turned on. Fan speed works.
    Sounnder

  5. #5
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    69
    Posts
    26,279
    Quote Originally Posted by sounnder View Post
    I replaced the O-rings. Hooked it up and it was still blew only through the defrost. Its not turning on the compressor when AC is turned on. Fan speed works.
    You can numerous problems.

    Only blowing thru the defrost.... o-rings not installed correctly or vacuum leak.

    Compressor not turning on.... bad EATC (unlikely), bad compressor, blown fuse, bad relay, wiring issue, no or low Freon....
    Last edited by fastblackmerc; 10-05-2023 at 05:20 AM. Reason: spl
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  6. #6
    Join Date
    May 2019
    Location
    Harrisburg, NC
    Age
    54
    Posts
    436
    Have you performed a self test and if so, were any codes given?

  7. #7
    Join Date
    Jun 2021
    Location
    Florida
    Posts
    23
    Good old EATC

  8. #8
    Join Date
    Jun 2008
    Location
    Lompoc, Ca
    Age
    59
    Posts
    82
    Finally have my Marauder running again. Ran the test and came back with no errors. Ran it through the motions and found that everything works except the vents.
    I must have messed up the O-ring when i had it apart. Looks like im taking it apart again.

    Thanks for the input!
    Sounnder

  9. #9
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    69
    Posts
    26,279
    I repair EATC's & LCM's.

    I can upgrade the button & fn wheel lights to LEDs.

    Msg me.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  10. #10
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,769
    FastBlackmerc… Come to California!<


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  11. #11
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    69
    Posts
    26,279
    Quote Originally Posted by 1Marauder View Post
    FastBlackmerc… Come to California!<
    Why what do you need?
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  12. #12
    Join Date
    Oct 2002
    Location
    USA
    Posts
    447
    I messaged you and would like to have my OEM EATC repaired.
    Lights are messed up.
    Also, I know the controller is wonked because I used a cheapy replacement to test and it fires the compressor fine, but this cheap one doesn't work right because pushing "Automatic" doesn't work right.
    So I want to repair the OEM one.
    ============================== ===
    Forget directions, I need to file a flight plan
    ============================== ===

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. EATC & Fan BCM REPAIR
    By Madhatter in forum Interior Electrical/Electronics
    Replies: 4
    Last Post: 08-05-2018, 04:21 PM
  2. EATC Repair
    By fastblackmerc in forum Marauder Innovations
    Replies: 25
    Last Post: 06-18-2015, 04:43 AM
  3. eatc repair
    By maineiac in forum Shop Talk
    Replies: 1
    Last Post: 07-30-2012, 04:28 PM
  4. Eatc repair??
    By biggeorge04 in forum Shop Talk
    Replies: 6
    Last Post: 09-23-2011, 10:10 PM
  5. EATC Repair
    By PonyUP in forum Southern Marauders
    Replies: 52
    Last Post: 06-28-2011, 06:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •