Results 1 to 10 of 10

Thread: Front Strut/CoilOver Assembly

  1. #1
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    43
    Posts
    1,771

    Front Strut/CoilOver Assembly

    Looking for anyone with a new set they are not using and looking too sell. OEM, Ridetech etc. Maybe even the Monroe ones also.


    Sent from my iPhone using Tapatalk


    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

  2. #2
    Join Date
    Feb 2015
    Location
    South Florida
    Posts
    1,117
    Quote Originally Posted by NATEHAWK View Post
    Looking for anyone with a new set they are not using and looking too sell. OEM, Ridetech etc. Maybe even the Monroe ones also.


    Sent from my iPhone using Tapatalk


    Have you checked with RockAuto? They have a selection and probably with a discount.

    Righteous Indignation
    03 300A
    4055 of 7838
    4054 of 7093 in Black.
    Born 8/23/02
    Adopted in 1/15
    SOLD

  3. #3
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    43
    Posts
    1,771
    Yea they have the Monroe ones...I just always ask here before buying from a site when I could help a fellow member out with a sell.


    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

  4. #4
    Join Date
    Dec 2015
    Location
    Remington, IN
    Age
    60
    Posts
    730
    Quote Originally Posted by NATEHAWK View Post
    Yea they have the Monroe ones...I just always ask here before buying from a site when I could help a fellow member out with a sell.
    I just looked on Rock Auto, and they only have Moog, AC Delco, Husky, and Westar... no Monroe.

    Anyone know a good place to get the Monroe? I need the shock too, so I'm thinking maybe the quick strut all in one...
    2003 Marauder... the gentleman's hot rod.

    You know what I like best about most people? Their dogs.


  5. #5
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    43
    Posts
    1,771
    Quote Originally Posted by daddyusmaximus View Post
    I just looked on Rock Auto, and they only have Moog, AC Delco, Husky, and Westar... no Monroe.

    Anyone know a good place to get the Monroe? I need the shock too, so I'm thinking maybe the quick strut all in one...




    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

  6. #6
    Join Date
    Feb 2017
    Location
    Chicago, Illinois
    Posts
    318
    I have installed the monroe's about 3 months ago. They ride very nice for what your paying. Close to OEM. It will lift your front end up about .25-.5" so be aware, but it will settle over time.

  7. #7
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    43
    Posts
    1,771

    Front Strut/CoilOver Assembly

    Quote Originally Posted by NorthShoreChiMM View Post
    I have installed the monroe's about 3 months ago. They ride very nice for what your paying. Close to OEM. It will lift your front end up about .25-.5" so be aware, but it will settle over time.


    My car has one coil cut in the front to be honest it sits too damn low lol. I feel like having the coil cut is kinda making the ride a tad more rough then it has to be. I'll welcome this lift for sure
    Last edited by NATEHAWK; 06-19-2018 at 06:26 AM.


    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

  8. #8
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    the factory shocks don't handle a cut coil very well in my opinion.
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  9. #9
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    43
    Posts
    1,771
    Quote Originally Posted by RubberCtyRauder View Post
    the factory shocks don't handle a cut coil very well in my opinion.


    Agreed. What shocks are you using on the back? I have a pair of QA1's I'm thinking about installing. If I don't use them In going to sell them. My rear shocks are still stock.


    Sent from my iPhone using Tapatalk


    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

  10. #10
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    I went to Ridetech's up front..I like them, but I don't daily the car..rear are still factory shocks at 47k miles. lowered rear air height and it feels off. Many on here have liked the QA1 rear shock. Motown, CWright which is now VKirken's car,


    I was thinking of trying a Ridetech rear shock. I believe they have one that falls into the travel range. I would try those QA1's and if you don't find a setting you like, then sell, but I think you'll you may like them. You have to get some 1/2 inch stainless nuts to use as a spacer for the bottom mount. Motown recently posted a pic of the set up.
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale Oem Strut Assembly
    By NorthShoreChiMM in forum Marauder-specific Parts for Sale
    Replies: 6
    Last Post: 03-02-2018, 05:54 AM
  2. Front Strut Assemblies
    By fastblackmerc in forum Steering, Suspension & Brakes
    Replies: 14
    Last Post: 09-15-2017, 02:25 AM
  3. Front strut ?
    By Mr. Man in forum Steering, Suspension & Brakes
    Replies: 8
    Last Post: 04-12-2017, 05:47 PM
  4. Front Wheel Bearings/ hub assembly
    By JAYSILVER04 in forum Shop Talk
    Replies: 7
    Last Post: 06-01-2014, 03:05 AM
  5. front wheel bearing assembly
    By burt ragio in forum Shop Talk
    Replies: 4
    Last Post: 04-04-2010, 09:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •